Description
The MaxxECU brand, has fast become my favourite ECU manufacturer. We install and tune these daily here at the ‘Tuningshed’. I’ve literally spent hours on the dyno, tuning them. We’ve installed countless setups too.
We can offer advice on ECU selection, and even with setup and first start. Best of all, we can tune the vehicle for you too.
I’ve started to upload some instructional videos onto my Youtube channel it will give you some idea of what we do, and more importantly, what these products can do for you and your project.
Made to fit the BMW 8HP shifter with the 10-pin connector, if using another CAN shifter, the connector needs to be cut and changed.
The OBD connector is there for future flash/tuning purposes.
1800mm between the shifter and the GT150 connector.
2100mm between the 8HP connector and the GT150 connector.
NOTE: the image shows the DODGE shifter.
14 day delivery on this item,
Be the first to review “MaxxECU 8HP (GEN1) cable harness (BMW 8HP shifter)” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.