Skip to the content
www.pvengineering.co.uk – Performance Vehicle Engineeringlogo darklogo light
  • Home
  • Shop
  • Remapping
  • Live Mapping
  • Wiring Looms
  • Contact Us
Cart 0
No products in the cart.
www.pvengineering.co.uk – Performance Vehicle Engineering
  • Home
  • Shop
  • Remapping
  • Live Mapping
  • Wiring Looms
  • Contact Us
HomeShopciviclink

Showing all 5 results

  • Link ECU G4X HC92 Civic 1992
    Add to cart
    Link ECU Range

    CIVICLink – HC92X – Link Honda Civic G4X

    £1,152.00
  • CivicLink HC96X G4X
    Add to cart
    Link ECU Range

    CIVICLink – HC96X – Link Honda Civic G4X

    £1,152.00
  • lINK G4X CivicLink pvengineering tuningshed
    Add to cart
    Link ECU Range

    CIVICLink – K20X – Link ECU G4X

    £1,318.80
  • Link G4X MX5LINK ECU Plugin PVEngineering Tuningshed
    Add to cart
    Link ECU Range

    MX5Link – MX5NB1X – Link G4X MX5 ECU NB

    £1,320.00
  • Link G4X MX5Link NB Plugin Pvengineering tuningshed
    Add to cart
    Link ECU Range

    MX5Link – MX5NB2X – Link G4X Plugin MX5 ECU NB

    £1,320.00

Filter by price

Price: —

Categories

  • 8HP Related88 products
  • Connectors2121 products
  • Custom Parts11 product
  • Displays & Clusters44 products
  • Jaguar Specific Products33 products
  • Keyboards & CAN Controllers11 product
  • Link ECU Range1818 products
  • MaxxECU Accessories3030 products
  • MaxxECU Adaptor Harnesses1818 products
  • MaxxECU ECUs88 products
  • MaxxECU Plugin Conversion3030 products
  • Merchandise11 product
  • Sensors55 products
  • Wiring Harnesses88 products

Product tags

8hp 8hp70 200sx adaptor audi automatic bmw bosch civiclink cmc connector ecu extra g4x gearbox gt-r harness jaguar kit link link ecu maxxecu maxxecu pro maxxecu uk mini molex nissan pdm pdm20 plugin pro pve r33 r53 race skyline sr20 standard street tool tuner tuningshed uk uk dealer wideband

steve@pvengineering.co.uk

Please feel free to E-Mail any questions or requests.

Button Text

logo dark

Your number one choice in the South West for tuning & motorsport electronics

Main Contact Number

01460 234142

Our address

Units 1-3, Bramble Cottage, Newtown,
Buckland St Mary, Somerset, UK

tuningshed
S54 Powered E36 Kens E36, purchased as a 328i, th S54 Powered E36 Kens E36, purchased as a 328i, then upgraded to a very high specification. S54 conversion, LSD, Carbon Air ox lots of details and upgrades everywhere! Booked in for us for a couple bits of wiring and to Boot the CSL flash onto the original MS54HP. EWS delete along with a few relevant changes due to a manual transmission change. Cam offset modification for OEM cams. A quick run up on the Dyno for confirmation. Lots of induction noise, so naturally I popped the camera up for the noises! Barrrp #e36 #e36m3 #s54 #csl #m3csl #e46m3 #e46 #bmw #bmwm3 #tuningshed #pve
1968 Camero with a Supercharged LS3 on Maxxecu Rac 1968 Camero with a Supercharged LS3 on Maxxecu Race, Dave's a well known local car builder. Specialising in the American market. Historically, Dave can be found at Santa pod pulling quarter mile runs in this 1300bhp Camero. It's recently been undergoing a conversion to make it into more of a 'Street Car'. This has involved some serious modification. Some serious upgrades. It's got modern power steering, a modern Z06 corvette independent rear axle. Air conditioning, a modern power steering system. 🤩 The engine is a nice new LS3, with the Magnuson Superchargers bolt on package. Running the Maxxecu / Maxxtuning AB Race ECU and LS harness package, Dave got the car up and running himself, and we managed to finish the job off on the Dyno. Good healthy numbers, and a fantastic torque curve you could put a ruler on! #tuningshed #camero #1968 #ss #maxxecu #maxxecurace #pve #tuner #dyno #ls3 #magnusonsupercharger
YB Cosworth ECU & Loom package off out the door th YB Cosworth ECU & Loom package off out the door this morning! We've boarded out our 'fast moving looms', Cosworth YB, AJ16, AJV8, K20A2 etc. All can be customised to an extent. This loom is going out for use with the stock distributer & coil. But many customers opt for the Coil On Plug option. This customer has opted for printed labels. The loom is braided with Vidaflex® Monofil PE, this offers very good mechanical strength and also provide excellent resistance to salt water, oil, fuels and solvents. It is self-extinguishing and operates at temperatures within the range of – 70°C to +150°C. The junctions are adhesive heat shrunk and all applicable connectors are booted. Aux connectors on engine, aux connectors near ECU. Aux connectors in Deutch DT & DTM. Full support with all packages & ECUs sold. We provide Teamviewer time and phone support to get your engine up and running. :-) MaxxECU Street at the heart of this package. It's hard to think of a better specced ECU for the money than the MaxxECU Street frankly. Contact for any information: Libby@pvengineering.co.uk 01460 234142 www.p-v-e.co.uk @maxxecu #cosworth #yb #loom #maxxecu #tuner #calibration #support #tuningshed #pve
Maxxecu in full control. As always. Marks X-Type Maxxecu in full control. As always. Marks X-Type new race car build. The first one on his grid to run the AJ30, so he wanted to make a decent job of it. Naturally the Maxxecu Race along with the AIM MTX Strada would fit the bill. The Maxxecu is now configured to run the fly-by-wire, both inlet flaps, both VVT banks, sequential fuel injection and ignition. Knock control on both banks. Closed loop wideband with lean protection on both banks. Fuel pressure monitoring, and included in the fuel model. Oil pressure monitoring with shut down protection. On board logging up to 1000hz. Breath... One little box does the lot! Good luck to Mark & the Auto Reserve massive. Maxxecu / Maxxtuning AB Aim Technologies Auto Reserve Parts #maxxecu #tuningshed #jaguar #aj30 #tuner #tuned #maxxecurace #autoreserve #xtype
Steve's Time Attack Turbo R53. Dave from 611 Moto Steve's Time Attack Turbo R53. Dave from 611 Motorsport made his familiar journey down from Manchester last week with Steve's little Mini. Dave has been building the car from a shell that Steve has supplied, and moved lots of bits and pieces over from his old build. Lots of new 611 Motorsport suspension bits and pieces along with some nice upgrades. Look forward to seeing Steve out at Caldwell Park for the first round of Time Attack. @611motorsport @link_ecu @timeattack_uk @dynodynamicsau #r53 #mini #turbominis #link #linkecu #r53oc #timeattack #611racing
730bhp Supercharged Mustang for calibration on HP 730bhp Supercharged Mustang for calibration on HP tuners. Kevin's epic Supercharged Mustang, following an engine rebuild, he decidded to get the calibration checked out. We initially did some logging, and ran it on the Dyno to find lots of knock, and some lean conditions. We made the decision to modify the calibration accordingly, based on the logs. The ECU was encrypted. Naturally. Fortunately, I have some real good friends in the industry. Massive shout out to Kenny from Motorsport Developments LTD for using my Bench read to decrypt the lock, allowing me to tune it normally via HPTuners. At this point my HP Tuners software decided it needed to update it's VCM firmware, and bricked itself beyond repair, naturally. So my my next shout out goes to Dave at MET & Metclean Automotive Equipment who lent me his HPTuners VCM for the day. I sent the wife up to collect it. What a day. 😂😂 Ultimately ended up with a happy customer and 730 safer BHP's. But behold, the glorious noise of the supercharged 5.0 V8. 🔥🥳 #mustang #supercharger #supercharged #tuningshed #tuner #dyno #hptuners #ford #pcm #v8 #supercharged #superchargedmustanh
Stroker Carbon Skyline. Big Garrett turbo supplyi Stroker Carbon Skyline. Big Garrett turbo supplying the air for a Stroked fully forged RB. Running too much boost for the fuse box lid, which is also carbon! 🤤 I thought I'd pop a video up of it, it's only running low boost at the moment, and making some decent numbers. It'll be back soon running Moon Boost, and I'll do a more in depth post and video. Cracking piece of kit, obviously running a Maxxecu! Maxxecu Race on this beasty. Maxxecu / Maxxtuning AB Grants Of Wellington #skyline #nissanskyline #tuningshed #maxxecu #maxxecurace #rb25det #rb25neo #boost #garrett #boosted
Wild Maxxecu Pinto powered Austin A40! 800kg of ep Wild Maxxecu Pinto powered Austin A40! 800kg of epic fun. Attention to detail is 11/10! Maxxecu / Maxxtuning AB Aim Technologies Simpson Race Exhausts #pinto #maxxecu #austin #austina40 #trackcar #tuningshed
Right in my wheelhouse. Supercharger, Maxxecu, spi Right in my wheelhouse. Supercharger, Maxxecu, spitting fire. 🔥💯 Rick's Jaguar XJ. Sporting one of our AJ16 ECU & Loom packages, coupled with an AIM PDM08, and the Swallows M118 kit. We move the throttle bodies on the supercharged race cars wherever possible. It allows insane throttle response, and allows us to use tried and tested front mount intercoolers. It took some real time getting it all to work nicely though initially. Consistent power delivery is maintained through a whole race using this system though. We look forward to seeing rick out on this beast this year, race season is well upon us now! Swallows Jaguar - Swallows Racing MaxxECU Community Aim Technologies #jaguar #aj16 #supercharger #fbw #maxxecu #tuningshed #swallowsracing
Plamersport Jaguar JP1, undressed, and dirty! 😜 Plamersport Jaguar JP1, undressed, and dirty! 😜 Cosworth developed AJV6 shouting her way to the redline, with a little help from the Maxxecu, providing all the goodies along with shift cut for the hewland sequential! Maxxecu / Maxxtuning AB Swallows Jaguar - Swallows Racing #maxxecu #dyno #jaguar #jp1 #swallowsracing #ajv6 #cosworth
MK1 Fiesta Quattro back on her wheels! Ecoboost MK1 Fiesta Quattro back on her wheels! Ecoboost AWD & lots of carbon incoming! #fiestamk1 #mk1fiesta #fiestaquattro #maxxecu #dsg #haldex
Patrick's glorious little gem. I meant to do a re Patrick's glorious little gem. I meant to do a reel. But waffled on so it was too long. So it's a 'post'. Some more video of the wild Metro! #b18 #honda #metro #retrometro #precisionpaint #vtec #linkecu #retro #retrocars #aimtechnologies #tuningshed #blinkmarine #tuner #tuned
On this day, 20 years ago I first put PVE on the i On this day, 20 years ago I first put PVE on the internet! Back in the good old days, when everything was done in HTML. I went on an evening course with a pal to enable us to get some sort of online presence. Back in the days of Forums and such! The title page talking about zetec turbos, and RS Turbo's mainly! (I still have the car on the home page!) But yeah, courtesy of Wayback machine! PVE as an idea has been about for about 25 years. Wow. I'm old. Lots has happened in those years. Lots has changed. Mostly good though! Still here, live and kicking! The website looks quite a bit different now! www.pvengineering.co.uk ( Still manage it myself all these years later). The joys of being a small business owner right!? #tuningshed #pvengineering #rsbible #rsturbo
Rover Metro widebody with a turbocharged B18. Thi Rover Metro widebody with a turbocharged B18. This is a sneaky preview of Patrick from @precisionpaintwellington long term build. I'll do a better 'Reel' with a description soon, showing some of the details on this. It's pretty much 'next level'. Lots of really nice touches on this, using a car that's rarely modified frankly. Keeping it sensible at a bar of boost for now. When I say sensible, that's still 320whp on the built motor! Calibrated on a @link_ecu g4x. Spooled to a bar by 3800rpm, and making power all the way to 8500. #honda #vtec #precisionpaint #tuningshed #b18 #metro #retro #retrocars #widebody #painter
Marks Westfield powered by a late Fireblade Engine Marks Westfield powered by a late Fireblade Engine running MaxxECU Race, all the way from sunny Blackpool. Nice little story to this little car. A dream envisioned by Simon, and ultimately completed by Mark. A few years ago Simon got in contact, as he had a lovely little Westy that he wanted to fit a late Fireblade engine into. He wanted to run the Fly-By-Wire system as fitted by Honda. He sent the throttle bodies down for me to have a play with. Once we were confident we could run it, he booked it in. We ended up building a whole vehicle loom. Running the absolutely epic MaxxECU Race, coupled with a PDM20 and at the time and AIM MXS. We got the car up and running and got some tuning done on it, with a view to finish up a few bits and pieces in the future. Wheel speeds, quick shift etc etc. Simon then got the horn for some Wheel-to-wheel action, that I've been following. He's been doing really well, and now moving up into the BMW series. Ultimately, the car got sold to Mark. Mark has 'made it his own'. There is lots of carbon fibre, a colour change, and come more class upgrades. Including an air quick shifter now mounted into the 'passengers seat'! He's also upgraded to the genuinely amazing AIM steering wheel with integrated screen. Mark came down from Blackpool, baring cake! I was all in at this point! We did a little tuning, and did some messing about with the secondary injector setup, and a bit of calibration i the VE & ignition tables to get her absolutely clean. We then set about the fun stuff, some throttle blip on downshifts, and some ignition cut on upshifts. Launch control activated by the blink marine 12-Way keypad, and a high idle on another button (This is a factory race engine with a tiny stator that doesn't charge until 3200rpm!) Cake & Coffee were consumed in one end, and BHP's came out the other! :-) Good luck at the weekend Mark, pleasure to meet you. And yes. I struggled getting out..... Maxxecu / Maxxtuning AB Aim Technologies Blink Marine Dyno Dynamics #pve #tuningshed #westy #westfield #r1 #cbr1000 #trackcar #tuner #dyno #dynodfamily #somersettuned #screamer #track
Volvo 240 sleeper! Mikes proper Volvo 240 turbo s Volvo 240 sleeper! Mikes proper Volvo 240 turbo sleeper. Lots of goodies bolted onto the forged engine. A cheeky TD04 doing the spoolies! One of the most comfortable seats I've sat in while mapping! 🤣 A full leather Chesterfield copy! No videos as we cut short due to a cooling issue. Looking forward to seeing this back to see what it can do! #tuningshed #pve #volvo #sleeper #maxxecu #volvo #volvoforlife #turbo #volvoxc #volvofamily #volvos #swedishmetal #volvomoment #volvonation #volvowagon #volvolife #classicvolvo #volvopower #redblock #classiccars #s #series #turbobricks #b #wagon #cars #volvobrick #swedishbricks #redblocksociety #swedespeed
YB powered MK2 escort on Maxxecu Sport. Every now YB powered MK2 escort on Maxxecu Sport. Every now and again, something comes through the door that makes you sot back, and just appreciate the level of work that's gone into a project. This, was indeed one of those times. Chris has owned this for many many years, and I can tell you he treats it like a old friend! A built Cosworth YB, twin Scroll Borg Warner, Maxxecu Sport ECU running fly-by-wire. Attention to detail everywhere, an epic, epic build. We made some mapping adjustments, and ended up with 375whp. We also wired his Corsa power steering module to the ECU. This allows the power steering to get lighter/heavier based on wheel speed and engine rpm. In a behaviour that mimics an OEM car. Naturally all programmed via the ECU. Great car, great power, great build. Thanks for bringing it down Chris. :-) Maxxecu / Maxxtuning AB BorgWarner Boosted #tuningshed #pve #fordescort #ford #mk #escort #fordescortmk #rs #fordescortrs #escortmk #classicford #fastford #fordperformance #cars #xr #classiccars #carsofinstagram #retroford #rally #cosworth #fordsofinstagram #fordrs #fordracing #rallycar #escortrs #forduk #car #classiccar #motorsport
Maxxecu / Maxxtuning AB 8HP control using my PMC M Maxxecu / Maxxtuning AB 8HP control using my PMC Motorsport shifter. Push and hold for forwards & backwards. Powered by @aimtechnologies PDM32. #maxxecu #tuningshed #pmcmotorsport #aimtechnologies #8hp #senderella
As it turns out.. My man @matt_urchfab does not As it turns out.. My man @matt_urchfab does not approve of my new auto darkening Amazon Special welding spectacles. Im surprised frankly, I was going to go for the Amazon Basics welding monacle, but pushed the boat out. No pleasing some people right!? 🤔 🤣 Urchfab Mini looking sweet, sounding sweet, not behaving. I remembered very quickly that I don't fit it racing Minis. 🤣 #urchfab #tuningshed #mini #classicmini #weldinggoggles
Had a great day chilling at Castle Combe Circuit o Had a great day chilling at Castle Combe Circuit on Friday with a few of the guys. Thanks to Slip&Grip Automotive for another great track day. It was nice to test a few bits and pieces I've modified on the car. Mostly steering and cooling. Now running a Mégane MK4 column, driven with custom CAN by the Maxxecu / Maxxtuning AB Pro. Thanks for the photos @mrprezzas you caught the fire perfectly! Some good banter to be had. Nice to see @matt_urchfab changing spark plugs like a Pro! His little Mini will be a weapon! We had to short shift to keep the noise down, but ultimately a successful day. Everything worked, and worked well. Yes, I know the fire is childish. But I'm childish. It's a race car. It's turned up to 11. Yes sir. @swallowsracing #slipandgrip #tuningshed #pve #somersettuned #urchfab #castlecombe #trackday #senderella #tracktoy #racecar #v8 #supercharged #supercharger #ctcrc #classicthunder #maxxecu #brutas #8hp
Follow on Instagram
Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

3 weeks ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
S54 Powered E36Kens E36, purchased as a 328i, then upgraded to a very high specification. S54 conversion, LSD, Carbon Air ox lots of details and upgrades everywhere!Booked in for us for a couple bits of wiring and to Boot the CSL flash onto the original MS54HP. EWS delete along with a few relevant changes due to a manual transmission change. Cam offset modification for OEM cams.A quick run up on the Dyno for confirmation. Lots of induction noise, so naturally I popped the camera up for the noises!Barrrp#e36 #e36m3 #s54 #CSL #M3CSL #e46m3 #e46 #BMW #bmwm3 #tuningshed #PVE ... See MoreSee Less

Video

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

3 weeks ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
Aston Martin Lagonda for MaxxECU Race & Harness,I hope everyone is enjoying their half term, and ensuring the kids are entertained at all times! 🙃We were honoured enough to be able to build an engine harness for this Aston Martin Lagonda. It runs the 5.3 V8 Engine with some downdraft Jenveys! Running now using the Maxxecu / Maxxtuning AB Race, twin wideband lambda, added in idle bypass valves and all the trimmings in replacement of the old setup that ran roughly, and would struggle to start!It's an absolutely classic 1970s design, that's so bloody ugly, it's beautiful! I absolutely love it! I love the off the wall projects that make you have to work for it. I'd hate to be doing the same car/engine over and over!Massive thanks to Richard at MTX Motors for getting us involved in this epic project.The craziest bit about this project? It's in Hong Kong.Richard drew up exactly what he wanted and sent me some drawings. I built him a harness and shipped it over. I sent over a base map, then using the MaxxECU on board logging facilities, we mapped it on the road, from the other side of the planet! The only constraint has been the time difference. Often I've been in bed late at night, tuning a car in Hong Kong!Some Lagonda facts for fun:Throughout the history of the marque, the hand-built Lagonda was amongst the most expensive luxury saloons in the worldThe Lagonda was the first production car to use a digital instrument panel. The development cost for the electronics alone on the Lagonda came to four times as much as the budget for the whole car.It was named by Bloomberg Businessweek as one of the 50 ugliest cars of the last 50 years#tuningshed #astonmartin #lagonda #astonmartinlagonda #1970 #maxxecu #maxxecurace #v8 #mtxmotors #hongkong #tuner #tuned #mapping #retro #restomod ... See MoreSee Less

Video

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

4 weeks ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
1968 Camero with a Supercharged LS3 on Maxxecu Race,Dave's a well known local car builder. Specialising in the American market. Historically, Dave can be found at Santa pod pulling quarter mile runs in this 1300bhp Camero.It's recently been undergoing a conversion to make it into more of a 'Street Car'. This has involved some serious modification. Some serious upgrades. It's got modern power steering, a modern Z06 corvette independent rear axle. Air conditioning, a modern power steering system. 🤩The engine is Magnuson Superchargershe Magnuson Superchargers bolt Maxxecu / Maxxtuning ABe Maxxecu / Maxxtuning AB Race ECU and LS harness package, Dave got the car up and running himself, and we managed to finish the job off on the Dyno.Good healthy numbers, and a fantastic torque curve yo#tuningshed #camero on!##ssi#maxxecuc#maxxecurace##PVEm#tuner #dynoe#ls3c#magnusonsuperchargerls3 #magnusonsupercharger ... See MoreSee Less

Photo

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

1 month ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
Some nice silverware coming from Cadwell Park today!Jack Robinson pulling off a perfect points for the second time this season. Fastest Lap, Class Win, and overall Win, and Tom Robinson hot on his tail with his own class wins, and places on the podium in both races, in a fairly standard XJS. I reckon you could put these boys in wheelie bins and they'd still podium! Glad to see their hard work is paying dividends. Jack managing to get his V8 XK8 into the 1.38. We've loomed & tuned both of these cars, obviously running Maxxecu / Maxxtuning AB Well done to Swallows Jaguar - Swallows Racing Some great positive news from one of our sponsored cars this year too! Charlie Ford managed to break his gearbox in Qualifying. After lots of work to his fiesta, including a forged Duratec we've recently tuned for him on Link ECU . He managed to find another gearbox albeit without an LSD, and fit it in the paddock! He was rewarded with two Podium places! 😁Well done guys, keep up the good work!#swallowsracing #maxxecu #fiesta #st150 #duratec #racecar #racecars #jaguar #x100 #ajv8 #linkecu #support #calibration #winningteam #pve #tuningshed #cadwell ... See MoreSee Less

Photo

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

1 month ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
YB Cosworth ECU & Loom package off out the door this morning!We've boarded out our 'fast moving looms', Cosworth YB, AJ16, AJV8, K20A2 etc. All can be customised to an extent. This loom is going out for use with the stock distributer & coil. But many customers opt for the Coil On Plug option. This customer has opted for printed labels.The loom is braided with Vidaflex® Monofil PE, this offers very good mechanical strength and also provide excellent resistance to salt water, oil, fuels and solvents. It is self-extinguishing and operates at temperatures within the range of – 70°C to +150°C. The junctions are adhesive heat shrunk and all applicable connectors are booted. Aux connectors on engine, aux connectors near ECU. Aux connectors in Deutsch DT & DTM.Full support with all packages & ECUs sold. We provide Teamviewer time and phone support to get your engine up and running. :-)MaxxECU Street at the heart of this package. It's hard to think of a better specced ECU for the money than the MaxxECU Street frankly. Contact for any information:Libby@pvengineering.co.uk01460 234142www.p-v-e.co.uk@maxxecu #cosworth #yb #loom #maxxecu #tuner #calibration #support #tuningshed #pve ... See MoreSee Less

Photo

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

© 2025 Performance Vehicle Engineering, All Rights Reserved

CONTACT

Our Main Contact Details. You may Whattsapp, our main number if needed

Main Contact Number:

01460 234142

Our address

Units 1-3, Bramble Cottage, Newtown,
Buckland St Mary, Somerset, UK

Socials: