ecu - www.pvengineering.co.uk - Performance Vehicle Engineering

Skip to the content

Home
Shop
Remapping
Live Mapping
Wiring Looms
Contact Us

Cart 0

No products in the cart.

Home
Shop
Remapping
Live Mapping
Wiring Looms
Contact Us

Showing all 6 results

Add to cart
Jaguar Specific ProductsWiring Harnesses
AJ16 Jaguar Plug & Play ECU Package MaxxECU Street / Track
£2,998.80
Add to cart
Link ECU Range
Link G4X MINI R53 Plugin – MiniLink – MINIX
£1,554.00
Add to cart
ConnectorsMaxxECU Accessories
Mems3 Mems ECU Header, MGF, K-Series
£27.60
Add to cart
Link ECU Range
MX5Link – MX5NAX – Link G4X MX5 NA Plugin ECU
£1,152.00
Add to cart
Link ECU Range
MX5Link – MX5NB1X – Link G4X MX5 ECU NB
£1,320.00
Add to cart
Link ECU Range
MX5Link – MX5NB2X – Link G4X Plugin MX5 ECU NB
£1,320.00

Search

Filter by price

Min price Max price

Price: —

Categories

Uncategorized1 product
8HP Related11 products
Connectors22 products
Custom Parts6 products
Harness Building Parts3 products
Jaguar Specific Products6 products
Keyboards & CAN Controllers1 product
Link ECU Range18 products
MaxxECU Accessories41 products
MaxxECU Adaptor Harnesses18 products
MaxxECU ECUs12 products
MaxxECU Plugin Conversion31 products
Merchandise1 product
Sensors5 products
Wiring Harnesses10 products

Product tags

8hp 8hp70 200sx adaptor audi bmw bosch cmc connector custom ecu extra g4x gearbox gen 2 harness jaguar kit link link ecu loom maxxecu maxxecu dealer maxxecu tuner maxxecu uk mini molex nissan pdm pdm20 plugin premium pro pve r53 race skyline street tool tuner tuningshed uk uk dealer wideband wiring

steve@pvengineering.co.uk

Please feel free to E-Mail any questions or requests.

Your number one choice in the South West for tuning & motorsport electronics

Main Contact Number

01460 234142

Our address

Units 1-3, Bramble Cottage, Newtown,
Buckland St Mary, Somerset, UK

tuningshed

Dyno time lapse of a JEK Titanium Exhaust turning

Dyno time lapse of a JEK Titanium Exhaust turning that beautiful Purple!

#titanium #jekfabs #pve #tuningshed #cosworth

Joe's forged F90 M5. I realise I haven't updated

Joe's forged F90 M5.

I realise I haven't updated my page for a minute or two, I apologise, I'm juggling a little.

A V8 with 32v is pretty much our staple, we do loads. Rarely with a pair of turbos though, normally a nice supercharger! 😂 The 8HP puts the power down beautifully. Naturally the software has been tweaked accordingly.

Still, forged pistons & rods, a block with fire rings, breathing mods and a pair of hybrid turbos, lots of boost, a serious meth problem, and hey presto, 897bhp.

Tuned on BM3,

Brutal acceleration in such a big car.

Thanks Joe. 👌

#bmwm5 #m5competition #tuningshed #pve

Sometimes it doesn't need to have a huge turbo for

Sometimes it doesn't need to have a huge turbo for me to give a good old 'second look'!

Audi 80 in lovely condition, with a little modernization!

@trautos over in Yeovil, removed the old K-jet fuelled 1.8, and replaced it with the well proven 20v engine, from a later Audi A4. They performed the engine conversion in its entirety, with the exception of the management.

I was fortunate enough to be entrusted with this. :-)

Maxxecu Street, custom harness with the ECU sat inside the vehicle. All the usual goodies with some modern injectors and an upgraded turbocharger, giving a nice safe 200bhp on tap.

The car is fantastic, it totally reminds me of when I first started driving, many moons ago! There were plenty of these in the road back then.

Loads of original 80's coolness on this car. With the bonnet shut, you'd never even know it's running a more modern engine to keep things a little more sensible in this modern world! Originally this car had 112bhp.

Absolutely loved this one!

#audi80 #maxxecu #trautos #audi #tuningshed

X300 XJR Turbo! Listen to the spool! Loads more

X300 XJR Turbo!

Listen to the spool!

Loads more information on the YouTube! Search for #tuningshed

#maxxecu #jaguar #xjr #x300

Digital speedo conversion, keeping the retro look

Digital speedo conversion, keeping the retro look & feel of the Peugeot Gti!

I use James' K20 converted Pug 309 Gti as a base to convert his mechanical style speedometer to a newer digital style, keeping the classic looks and feels of the OEM cluster.

Naturally these are fully programmable, and can be used in the 309 and indeed the 205gti.

I take it one step further, and have new guage faces made to replicate the originals, only 'all the way up to 11', well, not really, 10, but still! I'm really happy with this conversion, I hope James will be too!

I apologise for not having uploaded anything of late to my socials, I'm spinning plates constantly at the moment. Lots of exciting things going on at the moment, lots of development for some very well respected companies that will be revealed probably next year now. Some SERIOUS hours put in, but with some seriously cool cars!

Thanks to Uncle Spike here for sorting the bracketry and physically getting the speedometer to fit into the OEM cluster. Thanks to Stef for sorting me with some spare clusters for some Beta runs! Thanks also to James for using his car as a Guinea pig!

#k20 #tuningshed #gti #retrocars #pve #309gti #205gti #hothatch #maxxxecu #restomod #conversion

Massive congratulations to Jordan and his team at

Massive congratulations to Jordan and his team at Yellow Peril Racing.

Going home with a well deserved result at the Isle of Man Hill Rally.

1st in class and 6th overall, extending their class lead in the British Cross Country Championship.

Jordan is a lovely guy, that genuinely deserves results like these. We can see the work that goes into these machines, the absolute abuse they take requires constant maintenance and repairs.

This absolute weapon runs the BMW M62, coupled to the more and more popular 8HP gearbox. Naturally, all married together with the Maxxecu!

We look forward to following team 'Yellow Peril', and thank them for keeping us updated.

Credit to 54° North Images for the pictures.

#yellowperilracing #8hp #offroad #tuningshed #maxxecu

An early 900 turbo, 1979 to be exact. Such an awk

An early 900 turbo, 1979 to be exact.

Such an awkward looking car by today's standards. Quirks everywhere. The windscreen is so heavily wrapped, something again these days is just a thing of the past.

Tommy of TR Autos brought this over for us to look a t a few bits on the Dyno. He's a fountain of knowledge on any Saabs ( I can confirm, I've told him he is a sick man!) letting me in on various quirks of the early versions! Jackshaft for the water pump for instance on the early 8v engines. The gearbox arrangement feels odd too if you e never come across it!

An old K-Jet system sorting the fuel delivery, and ultimately causing Tommy's visit!

Fantastic car, even if I do immediately try and turn these damn things on using the key that's not there! 🫢🤭

#saab #900 #saab900 #saab900turbo #900turbo #trautos #tuningshed

Cool-as-fuck-ometer is all the way around to 11.

Cool-as-fuck-ometer is all the way around to 11.

Vauxhall Chevette 'HSR Homage' F20C powered.

Not a common sight these days, a Chevette in general. They were certainly more commonplace back when I first started driving. Whenever I get a common 70's car on the Dyno, I'm always amazed at how small they are. I literally had a 24 plate Aston Martin DB11 on the Dyno yesterday, a modern 2 x seater GT car, but the size difference is phenomenal. The Chevette, even with it's HSR panelling, felt miniscule!

Funny how we remember things differently! Or maybe I'm just old!

This little car is well known in the community, from what I can tell it's been built to a fantastic standard, and as I'm lead to believe, is built to HSR specs. It's fitted with a stock F20C Honda S2000 engine, with a set of Jenveys, and a dry sump system.

I'm always a fan of the small details in builds. When the small details are correct, it usually means the rest is, and I won't spend my day tracing wiring faults or reattaching hoses in some manner.

79' is a great year!

Andrew, the current custodian has some plans for some potential competition driving in the old girl. Along with coating some of the parts with Cerakote! Andrew owns and runs Amitec - leaders in preparation and application of coating systems, and the quality of the Cerakoted parts on this car are testament. 😉

Great to see you today Andrew, can't wait to catch up soon - he's promised me a couple of laps at Combe in the car.. and now it's in writing! 🤣

Anyway, howling away, as it should be

#jenvey #amitec #tuningshed #vauxhall #chevette #hsr #hs

Another Maxxecu Race Gen 2 harness built up for To

Another Maxxecu Race Gen 2 harness built up for Tom & Jack at @swallowsracing

This is a concentric harness, with Autosport bulkhead connectors.

Destined for something really fun!

It amazes me how many hours these sorts of harnesses sup up. Moving from the CMC to the Superseal was definitely a good move from @maxxecu for the gen 2 units.

#harness #jaguar #maxxecu #gen2 #swallowsracing tuningshed pve

The Jaguar AJ33 and the VVT! The VVT control for

The Jaguar AJ33 and the VVT!

The VVT control for the AJV8 comes up quite regularly for me. I've had a couple conversations on the phone this week from potential clients, both interested in fitting the AJV8 into a landrover based beasty of some description.

Both guys telling me that the VVT on the AJ33 makes no difference to power, and it's just there for emissions. Often times it feels like I'm beating my head against a wall. I get arguments for 'keeping it simple', or 'it's easier to just not use it'.

I meant VVT is pretty solid these days on aftermarket, it's literally a couple solenoids, and a pair of position sensors. Seems mad not to use it in my book.

A couple of weeks back I took the opportunity while tuning one, to lock the cams (via the MaxxECU) at 0 degrees and do a run, then with optimised VVT and did a run. The runs were back to back, within a couple minutes of each other. Power & Torque displayed at the wheels.

It's hard to argue with the 'No more power Gag', but I know I'd prefer the bags of extra torque left on the table right! It's not just for a few hundred revs either!

PS. The Supercharged AJ33S behaves in the same manner!

Naturally this is just WOT, and naturally in a race environment. There is no argument from me that VVT has an impact on the emissions, ultimately it should be calibrated correctly throughout, but to purposely not worry about emission, and indeed stump yourself of 40ftlb for the majority of your WOT seems utterly mad to me.

Let those cams swing! Let those free ponies loose!

@swallowsracing

#aj33 #aj34 #tuningshed #pve #pvengineering vvt landrover maxxecu

Pete's Audi S2, Proper build, G30-770 Garrett lot

Pete's Audi S2,

Proper build, G30-770 Garrett lots of engine goodies.

Glorious noises as you can imagine!

Naturally Maxxecu, lots of really Naughty Launch control noises, and a whole lot of 5 cylinder big turbo noises making my day!

We ran out of fuel pressure sadly! Pete will be back with more upgraded parts, so we can let her have the full extra two and a half atmospheres.

Good to see you mate!

@maxxecu
@garrettmotion

#tuningshed #quattro #audis2 #aby #maxxecu

Many moons ago, and I mean MANY! It was the early

Many moons ago, and I mean MANY! It was the early 90's. Lots of interesting stuff going on the general Automotive world still. Most of all, (for me anyway) the Jaguar XJ220. A car that still looks absolutely f****g amazing now, was built and sold. There were posters on my wall of this thing, and we used to play 'Jaguar XJ220' on the Commodore Amiga. Life was epic.

Fast forward a day or two, and I started racing a Jaguar. Before she got banned, we raced on a grid of classic Jaguars. Many of these had classic liveries. 'Castrol', 'Becks' and the likes! I have as you may know if you follow the page, an X100. So, for me, there was only one option. My favourite car of all time once raced in a Martini Livery.

Hold my Beer!

And so Senderella ended up with very rarely known XJ220 Martini Livery, as a Homage. (I can't stand the drink!) 🤣

Fast forward a few more evenings... @swallowsracing and @jec_coffeeandcars @triplecoroast put on a coffee morning, in which the absolute legends at @jaguardaimlerheritage.trust drove an XJ220 to take part. Yes, they drove it from Gaydon to Somerset. It's a testament really to the things! Id have loved that job!

Regardless, I didn't move very far from this car (and the coffee machine, naturally) all morning. I was lucky enough to move my car next to this legend and get a photo or two.

Made my absolute year to be fair! I'm a happy boy!

Thanks to all the guys that made this happen, the coffee and cars meets they've started doing are absolutely great, and I'm not a car show guy, like, at all! 🤣☕☕☕

#xj220 #jaguar #senderella #swallowsracing #tuningshed

Cosworth YB Harness for Mk2 Escort, with MaxxECU R

Cosworth YB Harness for Mk2 Escort, with MaxxECU Race

I seem to be getting more and more orders for these packages. I try to allow them to be as customised as is possible.

Stevie, sent me down a 'pattern' of where he'd like his ECU located on his Mk2 escort, along with various other sensors and the like for his YB Converted Mk2.

He's opted for fly by wire, modern injectors, K20 Coil on plug conversion along with various sensors for protection. Knock control / Oil temp / pressure and so on.

I've left an Aux plug in the engine bay for future upgrades, along with plenty of I/O inside the car too!

Stevie asked if I could sort a fuse box for him too, in order to make the installation as easy as it can be. I've modified the MaxxECU off the shelf fuse / relay box, so that all the new systems are powered by new fresh harnessing. Fuel pump & fans are powered by this fuse box. Plenty of labelled cable to get around the vehicle!

I've also added in a few extra wired for his guages & cluster. Hopefully it'll make his life installing the system nice and easy!

Another YB Mk2 safely under the instruction of a MaxxECU!

Thanks for the custom Stevie, I look forward to getting logged onto this and getting you up and running. :-)

@Maxxecu / Maxxtuning AB

#tuningshed #yb #cosworth #harness #mk2escort #retroford #wiring #maxxecu #maxxecurace #pve #tuner #retro #classiccars

Dave's 1.8T MR2, no beetle, no MR2, no beetle! Wh

Dave's 1.8T MR2, no beetle, no MR2, no beetle!

What a concoction. This is a MK3 MR2, with a 1960's beetle popped on the top, with a 1.8T BAM conversion. Phew. Oh, Maxxecu Powered obviously.

I love it when people build something, that they want. Exactly what they want. Not because the internet says they should, not because they want to gain subs on YouTube. Purely, because that's what they want.

Enter stage left, Dave Mahoney. Dave wanted to build a Beetle he could 'Daily', so reliability, a modern engine, power steering, brakes etc. Dave says, he was 'In the bath' when he discovered the wheelbase for an MR2 was nearly the same as a beetle!

And so it began,

He bought an MR2, bought a beetle, and amalgamated the two! Its a pretty convincing beetle too honestly! It's even got two fake 1" exhausts hanging out the back!

The perfect crime?

Nope,

The 1.8T conversion is becoming commonplace in the MK3 MR2, driven by Stav's channel. He's made a bolt in conversion mount kit for the 1.8T. Dave pops off and buys an Audi TT, pulls the engine and box, sells the remainder. Whipped the motor into the Beetle., and here we have it.

He's recently installed a Maxxecu. The Maxxecu Race runs the 1.8T beautifully, and allows being able to run the OEM beetle guages straight from the ECU.

It's very important how it looks to Dave., so there are lots of little bits and pieces to try and hide the fact it's actually an MR2.

I absolutely love it. It sounds utterly ridiculous flying up the road too! 🤣🤣

#maxxecu #beetle #mr2 #mr2beetle #18tconversion #retro #classiccars #vw #vw

@maxxecu

Suns out, jags out. @jekexhausts @swallowsracing

Suns out, jags out.

@jekexhausts
@swallowsracing
@maxxecu

#8hp #tuningshed #jaguar #x100 #maxxecu

MK4 Supra Maxxecu Plugin with 8HP support. This p

MK4 Supra Maxxecu Plugin with 8HP support.

This plugin Maxxecu adaptor off out the door this morning, has been modified to include wiring for an 8HP70 gearbox, and the BMW shifter.

Some minor additions to be added in, a wideband lambda sensor, and an IAT sensor, and we're away!

Again, a nice coat effective way of upgrading the old ECU, and running a modern transmission relatively easily.

#8HP #tuningshed #pve #supra #plugin #maxxecu #2jz #maxxecurace

Take one Ariel 'Hartley' V8 Engine, and just pop i

Take one Ariel 'Hartley' V8 Engine, and just pop it into something that weights even less....
Russ from Xtreme Race Cars - naturally did just that.
The unmistakable sound of a flat plane V8, revving to 10,500rpm. These engines were built by Hartley in the USA for Ariel.
This Class 7 Autograss car should be pretty epic. The Class 7 will look like a Mini Pickup for all that are unfamiliar!
Calibrated on the unbeatable MaxxECU Race ECU. Motec C127 Instrument cluster and a host of other goodies.
Good luck to Russ for the Season.

@maxxecu
@dynodynamicsau

#xtremeracecars #tuningshed #pve #somesettuned #v8 #flatplane #ariel #arielv8 #dynodynamics #maxxecu #maxxecurace #autograss #class7

Jacks AJV8 XK8. Jack Robinsons AJV8 powered XK ha

Jacks AJV8 XK8.

Jack Robinsons AJV8 powered XK has been under development for a few years now. Ultimately running a stock 4.2 Bottom end, with cams and headwork. We've wanted to get a 'proper' engine in this car for a good while. I mean, in reality he's currently running the 'Number 1' on his car, since winning his championship last year, but still, the plan was always to develop this NA engine into something worthwhile.

I love these sorts of projects. Ultimately, very few people, if any who have done such a thing. Certainly few with cast iron information, or indeed results. Jack was successful enough in his XK to have been moved up a class, so this opened up being able to actually modify the engine to a similar fashion to others in his class (Albeit different engines). So here we have it, a 'revvy' AJV8.

Lightened, balanced, fully customised engine. Built and developed between Swallows - PVE - Mark (Auto Engineering).

We've spent an awful lot of time mechanically moving cam angles after running in this engine today. As you can imagine, modifying 4 x cam positions is a bit of a pain on a hot engine. (Luckily I had Tom Robinson for that)! Some very interesting results on moving the camshafts about were had on the custom camshafts. Ultimately being able to make some fairly significant gains in areas he thought the car was lacking in.

As with all development, I'm keen to see how it progresses, we're revving this far more than it should be. Piston speed is a massive concern honestly, Mark has been very keen to keep mentioning! These mechanical limits are there to be pushed though, until somebody finds out right?!

I wish Tom and Jack good luck racing in the Modern Classics with the Classic Sports Car Club at Spa next weekend. They will be facing serious cars there, plenty of BMW's and M3's. I'm very Jealous! Maybe next year.

Good luck to Jack Robinson Tom Robinson and the whole Swallows Jaguar - Swallows Racing crew with this old girl!

May your pistons stay in your liners!

#maxxecu #jaguar #ajv8 #xk8 #tuningshed

Another K20 swap wiring harness nearing completion

Another K20 swap wiring harness nearing completion.

A classic hot hatch. Wonder if you can guess what?

I've got an anal level of integration going on with this one. Anyone can get a K20 to run in anything. Nothing to it. Getting everything working as it should like factory takes some thinking about. Mechanical speedo, rev counter without enough revs!

Going the extra mile.

#maxxecu #kswap #harness #loom #maxxecurace #tuningshed #integration #hothatch

Maxxecu Race LS harness, one of two harnesses leav

Maxxecu Race LS harness, one of two harnesses leaving today.

We've supplied and modified this Maxxecu LS harness to incorporate the 8HP gearbox connector, and BMW shifter, along with adding in a connector for the clients pieburg CWA200 water pump.

The client has opted for the Maxxecu Fuse Box also, so we've modified the fuse box and connector to incorporate the water pump & gearbox.

This really should be a dead easy way of getting an LS with an 8HP up and running with very little hassle.

This harness and ECU left today, ready to be slotted into, I believe a DAX kit car!

@maxxecu

#maxxecu #ls #lsswap #harness #tuningshed #loom #somersettuned

Follow on Instagram

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

(opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

(opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

1 week ago

The latest offering of the Maxxecu Gen 2 range!Happy to report we have some stock already;Introducing the new MaxxECU GEN2 SPORT!The compact little brother of GEN2 TRACK and RACE, packed with serious performance!Designed for up to 6-cylinder engines with fully sequential fuel and ignition control. Featuring built-in wideband lambda, dual knock control, 550 kPa MAP sensor, CAN bus, high-speed logging, USB-C Wi-Fi and Bluetooth.And just like its bigger brothers, it supports advanced engine control, Lua scripting, OEM CAN integration and 8HP, DSG and DCT transmission control.All packed into a compact, waterproof IP68 aluminum enclosure.See more att maxxecu.comwww.facebook.com/share/v/1DVBK5fx5Y/ ...

View on Facebook (opens in a new tab)

· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

2 weeks ago

I'd like to thank the generous soul that sent me a gift today, of cake and tea!The gift had no note, so ive nobody to thank directly!I expect this kind of thing Mid February honestly, all those secret admirers sending me various gifts.... But to whomever you are, I salute you! Greatly appreciated by us all here!😍 ...

View on Facebook (opens in a new tab)

· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

3 weeks ago

A few laps at Castle Combe in Senderella with the CSCC 'Modern Classics'.Our Jaguar Senderella was one of the first 8HP powered circuit racing cars. (Probably the first, I've not come across one before this, but there may be). She was the first XKR X100 with an 8HP fitted. We were fortunate enough to be able to be included in the MaxxECU Beta test program when the 8HP / MaxxECU combination was in development. We've developed it consistantly, to provide silky smooth up & downshifts both on and off the track. Throttle blip matching and smooth shifts at every rpm & load point don't happen in an afternoon as you can imagine. Swallows Jaguar - Swallows Racing and I now have a few 8HP road cars running around, and have started to slowly introduce our MaxxECU Track, and road going 8HP conversion. All of these cars certainly initially, will be converted at Swallows.Genuinely moving the X100 into the modern world. :-)Anyway, this is my good friend Tom from Swallows who took the first stint in in Senderella, and the first time he's ever driven it. The sound, the power, the feelings in this thing all give a wonderful 1990's experience! Looking forward to doing some more with it next year! Thanks to all the guys who get involved with this thing! It's not the 'norm', it's not a BMW or a VW, so nothing is available, nobody is doing it. Everything has to be made! I appreciate everyone who helps lends advice and just generally spurs me on!Swallows Jaguar - Swallows RacingJEK FabricationsMaxxecu / Maxxtuning ABAim TechnologiesClassic Touring Car Racing Club#jaguar #x100 #classiccar #swallowsracing #maxxecu #tuningshed #jekfabs #8hp #8into1 #v8 #supercharger #senderella ...

View on Facebook (opens in a new tab)

· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno is with JEK Fabrications at Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno.

3 weeks ago

Time lapse of a JEK Titanium exhaust, turning that beautiful Purple!#jekfabrications #pve #tuningshed #titanium #TI #exhaust #cosworth ...

View on Facebook (opens in a new tab)

· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno is at Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno.

3 weeks ago

Joe's forged F90 M5. I realise I haven't updated my page for a minute or two, I apologise, I'm juggling a little.A V8 with 32v is pretty much our staple, we do loads. Rarely with a pair of turbos though, normally a nice supercharger! 😂 The 8HP puts the power down beautifully. Naturally the software has been tweaked accordingly. Still, forged pistons & rods, a block with fire rings, breathing mods and a pair of hybrid turbos, lots of boost, a serious meth problem, and hey presto, 897bhp.Tuned on BM3,Brutal acceleration in such a big car.Thanks Joe. 👌#dynodfamily #tuned #m5 #bmwm5 #m5competition #hybrid #tuningshed #pve ...

View on Facebook (opens in a new tab)

· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

© 2025 Performance Vehicle Engineering, All Rights Reserved

CONTACT

Our Main Contact Details. You may Whattsapp, our main number if needed

Main Contact Number:

01460 234142

Our address

Units 1-3, Bramble Cottage, Newtown,
Buckland St Mary, Somerset, UK

Socials:

We are currently away, any orders on the website will NOT be processed until 09/11/26

Thankyou!