MaxxECU MINI

Description

The MaxxECU brand, has fast become my favourite ECU manufacturer. We install and tune these daily here at the ‘Tuningshed’. I’ve literally spent hours on the dyno, tuning them. We’ve installed countless setups too.

We can offer advice on ECU selection, and even with setup and first start. Best of all, we can tune the vehicle for you too.

I’ve started to upload some instructional videos onto my Youtube channel it will give you some idea of what we do, and more importantly, what these products can do for you and your project.

Free with all MaxxECU orders for a limited time, is the PVE ECU Mount kit (Pictured). This will help you make an exceptional job of mounting your new ECU. 🙂

The MaxxECU MINI Standard:

Advanced entry-level engine control system for up to 4 sequential cylinders. Up to 8 in wasted spark.
Faster and easier tuning with the built-in MAP-sensor up to 3 bar / 43.5 psi of boost.
Get started faster with the easy-to-use MTune PC-software

Included within the kit:

MaxxECU MINI
MaxxECU 2.5m Flying Harness
USB Cable
Printed Wiring Diagram
Quick Start Guide
Sticker Kit

Selected features

Waterproofed aluminium case
Boost control (triple stage)
Traction control
Internal loggings
Shift-cut and launch
Advanced warning system
Launch control
Built-in MAP-sensor
4 injector outputs (high impedance)
4 ignition outputs
4 extra outputs (GPO)
2 extra analog inputs (0-5V)
2 extra digital inputs (HALL)
CAN bus

Target engines for MaxxECU MINI

All 1-4, 6 and 8 cylinder engines
Up to 4 cylinders fully sequentially (using a digital input as HOME)
Up to 8 cylinders in wasted spark

MaxxECU MINI inputs

Intake air temperature sensor (IAT)
Coolant temperature sensor (CLT)
Throttle position sensor (TPS)
1 trigger input (VR/HALL). Automatic trigger level detection
2 digital inputs used for example for speed sensors (Hall) or switches
2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure
Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost

MaxxECU MINI outputs

4 injectors outputs. High impedance only
4 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
4 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-3 (2A), GPO 8 (2A)

MaxxECU MINI technical

CAN bus for expansion modules, OEM vehicle CAN, ODBII
USB communication for tuning with MTune
8MB memory for internal logging, up to 1000Hz
Supply voltage 8-22V
ARM Cortex-M3 120MHz main processor
Resolution on ignition: 0.1 degrees
Resolution on injectors: 0.001 ms
Updates the fuel and ignition calculations 2000 times per second
The fastest PC communication on the market
85x120x43mm excluding protruding connectors
Weight: 245g (ECU only)
Waterproofed aluminium case

When ‘Backorder’ is stated, the Webshop will allow you order the item, but please allow 2-weeks for delivery.  When ‘In Stock’ is stated, normally you will recieve your product within 2 working days.

MaxxECU ECU Videos