MaxxECU PRO

Description

The MaxxECU brand, has fast become my favourite ECU manufacturer. We install and tune these daily here at the ‘Tuningshed’.

I’ve literally spent hours on the dyno, tuning them. We’ve installed countless setups too. We can offer advice on ECU selection, and even with setup and first start. Best of all, we can tune the vehicle for you too.

I’ve started to upload some instructional videos onto my Youtube channel it will give you some idea of what we do, and more importantly, what these products can do for you and your project.

Free with all MaxxECU orders for a limited time, is the PVE ECU Mount kit (Pictured). This will help you make an exceptional job of mounting your new ECU. 

For tuning masterminds working with racing professionals looking for the most advanced engine control system, this is it.

On the track, winning or losing comes down to details. That’s why MaxxECU PRO can access just about any information – Tune to perfection
Includes our easy-to-use MTune software for intuitive tuning, and real-time monitoring / control with our wireless MDash Android app.

Selected features

Launch control
Knock control
Boost control (triple stage)
Nitrous (stages)
Traction control
Shift-cut
VANOS / VVTi, variable valve timing
CAN bus (dual)
Auto transmission support
Advanced dragracing functions
Flex fuel
2 knock sensor inputs
12 EGT inputs (separate harness)
16 injector outputs (high/low impedance)
12 ignition outputs
22 extra analog inputs
10 extra digital inputs
30 extra outputs (GPO)
Wideband lambda (dual)
E-Throttle (dual)
Waterproofed aluminium case
Bluetooth
Accelerometer

Target Engines of MaxxECU PRO

All 1-12 cylinder engines (4-stroke)
Up to 12 cylinders fully sequentially
Up to 12 cylinders in wasted spark

MaxxECU PRO inputs

Intake air temperature sensor (IAT)
Coolant temperature sensor (CLT)
Throttle position sensor (TPS)
Dual lambda (WBO) sensor. Uses sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
6 temperature sensors. Can be used for logging or control of additional functions
16 0-5V inputs. Can be used for additional sensors such as measurement of fuel / oil pressure
10 digital inputs used for example speed sensors (4 can use VR-sensors) or switches
Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost
12 EGT TYPE-K/N inputs with separate harness (up tp 1200C/2200F

MaxxECU PRO outputs

16 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
12 ignition outputs. 5V signals to drive ignition modules, CDI units / coils
30 extra outputs for additional features. Can be adjusted to control virtually anything like fuel pumps, idle valves. GPO 1-8 (2A), GPO 9/10 (5A), GPO 11-14(2A), GPO 15-23 (12V sourcing, 4A), GPO 23-30 (1.5A)
Dual E-Throttle support

MaxxECU PRO technical

CAN bus for expansion modules, OEM vehicle CAN, ODBII
USB communication for tuning with MTune
Bluetooth for connecting to mobile devices with MDash
8MB memory for internal logging, up to 1000Hz
Supply voltage 8-22V
ARM Cortex-M3 120MHz main processor. Three extra processors to handle the triggers, injectors and EGT
Resolution on ignition: 0.1 degrees
Resolution on injectors: 0.001 ms
Updates the fuel and ignition calculations 2000 times per second
The fastest PC communication on the market
50Hz sampling rate on all EGT inputs
1000Hz sampling rate on all analog inputs
Weight: 1137g
252x180x40mm excluding protruding connectors
Built-in accelerometer up to 8G
Waterproofed aluminium case with shock absorbers.

MaxxECU ECU Videos