Skip to the content
www.pvengineering.co.uk – Performance Vehicle Engineeringlogo darklogo light
  • Home
  • Shop
  • Remapping
  • Live Mapping
  • Wiring Looms
  • Contact Us
Cart 0
No products in the cart.
www.pvengineering.co.uk – Performance Vehicle Engineering
  • Home
  • Shop
  • Remapping
  • Live Mapping
  • Wiring Looms
  • Contact Us
HomePosts tagged "haltech"
Nissan Skyline Tuned On Haltech, somerset, south west, rolling road dyno tuningshed, pve
Live MappingWork Blog

Nissan Skyline R34 Haltech Converted

We converted this 90’s legend to run on Haltech Elite 2500. Once converted to modern management, we tuned it on our in house rolling road. Our no nonsense, ‘no bullshit

Read More

Cart

Categories

  • Jaguar Specific Tuning
  • Live Mapping
  • MaxxECU Instructional Videos
  • Projects
  • Remapping
  • Work Blog

Related Posts

Manual XKR XK8 Conversion Jaguar X100
Jaguar Specific TuningWork Blog
Jaguar X100 XKR Plug and Play ECU Project
Richard Hammond Driving Swallows Racing PVE Drivetribe Manual XKR
Jaguar Specific TuningLive Mapping
Hammond Drives the PVE tuned manual XKR
S-Type R Plug and Play ECU MaxxECU
Jaguar Specific TuningWork Blog
Jaguar S-Type R Plug and Play ECU Project

Instagram

tuningshed

Had a great day chilling at Castle Combe Circuit o Had a great day chilling at Castle Combe Circuit on Friday with a few of the guys. Thanks to Slip&Grip Automotive for another great track day.It was nice to test a few bits and pieces I've modified on the car. Mostly steering and cooling. Now running a Mégane MK4 column, driven with custom CAN by the Maxxecu / Maxxtuning AB Pro.Thanks for the photos @mrprezzas you caught the fire perfectly!Some good banter to be had. Nice to see @matt_urchfab changing spark plugs like a Pro! His little Mini will be a weapon!We had to short shift to keep the noise down, but ultimately a successful day. Everything worked, and worked well.Yes, I know the fire is childish. But I'm childish. It's a race car. It's turned up to 11. Yes sir.@swallowsracing#slipandgrip #tuningshed #pve #somersettuned #urchfab #castlecombe #trackday #senderella #tracktoy #racecar #v8 #supercharged #supercharger #ctcrc #classicthunder #maxxecu #brutas #8hp
Julian's 20v Fiat Coupé on Maxxecu Race.Julian Julian's 20v Fiat Coupé on Maxxecu Race.Julian travelled down from Nottingham with his 20v Fiat Coupé. It's been an ongoing project for him for a few years. It's had a fully forged engine, with lots of bolt on goodies, and an EFR6758 Turbo. We were aiming to crack the 400bhp mark, with around 1.7-1.8bar of boost.Our first run on the Dyno immediately showed some issues. 100% duty cycle on the boost control solenoid, along with a 'lethargic' boost curve. 280bjp at 1.5 bar peak. The power curve absolutely fell off a cliff by 5750rpm. Ok, weve got some work to do here!After some diagnosis, we discovered the DV had accidentally been plumbed incorrectly, bypassing air. A quick Dyno fudge plumbing job sorted that, and we were able to get on with the job in hand. Calibrate the ECU!We ended up with 367bhp, as we've got some potential fuel demand issues.But a 4 year trek for Julian somewhere nearing now where it should be.Lovely looking car that Julian imported from Japan. Thanks for coming to see us Julian!Maxxecu / Maxxtuning AB #fiat #fiatcoupe #20v #5cylinder #5cylinderturbo #tuningshed #tuner #tuned #maxxecu #maxxecurace
Jack's V8 M60 8HP E30 on Maxxecu Race.Jack purch Jack's V8 M60 8HP E30 on Maxxecu Race.Jack purchased an ECU kit from me in the summer. I logged on via TeamViewer and did a startup with him after he'd finished wiring it up.A few extra sensors here and there for fuel pressure, oil pressure and the like Some VW COP and some new injectors add to the mix.The E30 Touring has always been a guilty pleasure of mine, even before they were cool, and just old snot you'd buy cheap from from the 'yellow paper'! A great machine this one.Calibrated on the Maxxecu Race, close loop fuelling, knock control, oil temp engine speed limiter, 8HP control setup with blip down, and torque reduction up.Cracking machine.Maxxecu / Maxxtuning AB Dyno Dynamics #e30 #bmwe30 #maxxecu #tuningshed #pve #touring #classicbmw #retrobmw
Jaguar XJS Celebration 4.0Absolutely stunning co Jaguar XJS Celebration 4.0Absolutely stunning condition Minty Mint AJ16 XJS running up on our Plug & Play Maxxecu system.All functions working as OEM, including A/C and cruise.A quick tune up, ready to rock. Swallows Jaguar - Swallows RacingMaxxecu / Maxxtuning AB Dyno Dynamics #jaguar #xjs #aj16 #tuningshed #pve #swallowsracing #retro #celebration #6pot #6cylinder #jag
309Gti running a Gti6 engine on Maxxecu.James tr 309Gti running a Gti6 engine on Maxxecu.James travelled halfway accross the country to collect this old girl. The bare bones of a great project. Already fitted with a 306 GTi6 engine, and a few tasty mods for a track weapon.He's had lots of bits and pieces done already, and we were entrusted to sort out the Engine Management.Naturally, a Maxxecu was in order. A Maxxecu Street in this case. PWM control on two newly fitted radiator fans. All the OEM functions working as they should.Cracking car, love the look and the sound of them. Takes me back!Maxxecu / Maxxtuning AB Dyno Dynamics #tuningshed #pve #somersettuned #peugeot #309gti #peugeotsport #baguette #maxxecu #maxxecustreet #tuned #dynodfamily #dyno #rollingroad #gti6
Tommy's SAAB 900 Turbo. This was in a while ago. Tommy's SAAB 900 Turbo. This was in a while ago. She's running the Maxxecu Sport, with FBW, multiple boost maps, coil on plug all the goodies.She was in a couple of weeks ago to tune a higher boost map, along with a few other bits and pieces, including a CAN-Checked 52mm guage, and sorting the ECU to run the Air-Con.280bhp. Retro looks, and Tommy's just had some bought some ace wheels and had them painted. Looking forward to seeing it on her new rims.TR Autos Maxxecu / Maxxtuning AB CANchecked #trautos #tuningshed #retro #pve #dynodfamily #saab #saab900 #saabturbo #maxxecu #fbw
Another Racing Jag on our Maxxecu P&P kit!Loom a Another Racing Jag on our Maxxecu P&P kit!Loom and ECU posted to customer. Customer fitted. Remote session from me to get them up and running, then a trip down to see my handsome self to make her sing!Lovely XJS racing car that's been in the circuit for a few years, and straight off to SPA shortly.The most power we've seen from a NA AJ16 to boot. Internal datalogging as standard on all Maxxecu which was a customer requirement. This one is running the 'Race' with plenty of I/O, knock control and plenty of future development available. 👌Look forward to seeing her out and about.#tuningshed#pve#somersettunedMaxxecu / Maxxtuning AB Dyno Dynamics #swallowsracing #jaguar #jaguarracing #xjs #jaguarxjs #racecar #jaaag #tomlentheljaguar #maxxecu #maxxecurace #plugandplay #loom #harness
Jaguar X100 XK V8 race car.Mark, (the handsome d Jaguar X100 XK V8 race car.Mark, (the handsome devil) has been to see us a few times now. Travelling all the way down from Derby, just to see my handsome face! Mark works with Andrew at Auto Reserve and are often sending me all sorts of random bits and pieces I decide I need for my old Jag! Including the most recent parcel containing an 8HP. Hit them up for any Jag bits!Mark had recently fitted a Maxxecu Race, that we'd supplied him a few months ago. Once he'd finished up, we logged on online and got it fired up and idling enough for him to make the trip down to the Dyno.A few man hugs, and a coffee or two, and the job was started. A relatively trouble free Dyno tuning session. Plenty of low down grunt, and a nice free revving 4.2. Look forward to seeing the old girl out on track. 🤜🤛Good luck guys,Maxxecu / Maxxtuning AB Auto Reserve Parts Swallows Jaguar - Swallows Racing #tuningshed #pve #somersettuned #autoreserve #jaguar #x100 #v8 #maxxecu #racecar
MK3 RS Focus, compression test checks out. 💪h MK3 RS Focus, compression test checks out. 💪https://youtu.be/JQFC_IPbIOg
Maxxecu Race powered EP3 on throttle bodies. I'l Maxxecu Race powered EP3 on throttle bodies. I'll apologise for the lack of updates here, and the slow email response. I've had the busiest last few weeks we've ever had. Long days is a bit of an understatement, 3am 'last night' replacing a Turbocharger on an RS3. Back up early on the Dyno ready for Mark, who's travelled from Derby to see us. Thank you guys for the trust. 🤩🤩This little beauty is Tim's EP3. A long term track car that's had many guises along the way. He's recently fitted a set of throttle bodies, and has been communicating with us about the ECU requirements. There are a few options out there, even some plugins nowadays. He'd already purchase himself a 'budget' replacement engine harness as his original had been cut about and messed with. We decided a Maxxecu Race would be the best option. Knock control, lots of additional I/O, onboard datalogging etc.. One of the best bits about the Maxxecu is being able to map the K20 in the same manner as the OEM ECU. Multiple VE tables & ignition tables, that interpolate based on cam angle. It saves having to modify the tables every time you demand a different cam angle. Just like Honda did it!Can't wait to see him in track again,Lots of noise. 🫢Maxxecu / Maxxtuning AB Jenvey #tuningshed #pve #k20a2 #k20 #throttlebodies #jenvey #maxxecu #maxxecurace #vtec #bhp #trackcar #widebody #ep3 #civic
Charlie's cracking little R53.In for tuning on t Charlie's cracking little R53.In for tuning on the OEM ECU, 469, 550's, Airtec. Charlie's built this engine with his father, as the old one had a cracked cylinder head. The R53 does seem to suffer with this in fairness. They crack near the spark plug hole.It's great that he's built the engine with his dad. I'm pleased that this sort of work can be handed down from generation to generation. I sometimes feel that this sort of 'dirty' skill is almost looked down upon these days.A 'mechanic', in these modern times, needs to be a million things. An engineer, an electrician, a plumber, an admin clerk, a telepath! I imagine it was an enjoyable experience for father and son, and I respect it massively. I look forwards to building an engine on my son's first car. 👌👌Lovely little car, nice and tidy cracking couple too, thanks for coming down guys, pleasure. 👌👌611 racing @catcams_official @611.racing AIRTEC Motorsport @airtecmotorsport #tuningshed #pve #pvengineering #r53 #53oc #cooper #minicooper #dynodfamily #tuned #tuner #coopers #trackcar #supercharged #supercharger
AJ6 Jaguar XJS, loomed & tuned!Swallows Jaguar - AJ6 Jaguar XJS, loomed & tuned!Swallows Jaguar - Swallows Racing new 'race rental' Jaaaaag. MaxxECU Street fitted with one of my off the shelf AJ16 looms. Some small mods to the AJ6, namely front pulley and cam position sensor from an AJ16, allow us to run the AJ6 beautifully. Naturally fully sequential. Upgraded COP to the easily obtained VAG units. (Yes I dislike the red ones too, I'd planned on black coils)! Commonly used modern Bosch injectors also added at the same time. Mostly these things are added for reliability. Some of the old Jag stuff is 30+ years old, and getting more and more scarce. Replacing these with modern equivalents makes perfect sense. The on board wideband keeps the fuelling in check, and also some great information for the on board logging (up to 1000hz you know!). Oil pressure, and oil temperature also added into the mix. All of this data is transmitted over CAN to the newly fitted Aim Technologies PDM08, and 10" screen. A quick tune using one of my basemaps for the AJ6 on the Dyno, and she's ready to compete!A great little race car being tested soon before it's first race in future classics. Swallows Jaguar - Swallows Racing Maxxecu / Maxxtuning AB Aim Technologies Dyno Dynamics #tuningshed #maxxecu #swallowsracing #jaguar #xjs #jaguarxjs #racecar #twr #aj6 #aj16 #pve #pvengineering #xjr #maxxecustreet #db7
500bhp AWD Volvo C30, and a cracking summer haircu 500bhp AWD Volvo C30, and a cracking summer haircut! 🤷👌Sam's Epic Maxxecu powered GTX3584R C30. Fully forged T5, and now with added AWD.At the heart of this conversion is the Maxxecu Race of course! Not only controlling the engine perfectly, with various boost Maps accessible from the OEM steering wheel. It's working all the OEM guages, the OEM Air conditioning, the traction control using information from the OEM ABS module, but now controlling Sam's Volvo Haldex module too. Using wheel slip data, tps data and vehicle speed data, it will determine the AWD characteristics.Sam's properly worked hard on this car, fully forged T5 engine, custom manifolds, custom work everywhere. Great to be involved. Maxxecu / Maxxtuning AB Dyno Dynamics #maxxecu #maxxecurace #volvo #volvot5 #t5 #tuningshed #awd #500plus #tuner #tuned #summerhair
An R53 with a difference. Raised, no Aero kit, and An R53 with a difference. Raised, no Aero kit, and no R56 rear splitter. 😍😁Jack brought his little Rallycross Mini over for us to dial in his 469 & 550cc injectors. He also, got his gran to make Pasties. He arrived, with 6 hot proper Cornish home made pasties. I went the extra mile for this guy! 😍We ran the vehicle up, 6psi of boost. Amazing. Crack out the smoke machine to find a cheeky split on the intercooler boot. A full 'dyno fudge' later involving some tape, and some glue, and we're golden!Jack also got his other half to make Chocolate cake to bring. This guy's trying to butter me up. Well, as it goes, I respond very well to beong buttered up with pasties and cake! Thanks to Miss Rowe for the excellent cake!Some mild mods to my 469 base map, and we got her nailed. Lowered fan temps, and all those goodies!Thanks for coming down guys!#tuningshed #r53 #r53owners #r53ownersclub #InTimsBeardWeTrust #dynodfamily #gp #rallycross #tuned #469 #pvengineering
A glorious MK1 Golf 20v on Maxxecu Sport.Another A glorious MK1 Golf 20v on Maxxecu Sport.Another exceptionally well prepared MK1 GTi. Mark has owned this gem for 30 years, and has performed all of the modifications himself. Lots of 20v goodies!We actually tuned this a couple of years ago, but we ran out of injector essentially.Mark booked it back in to have some bigger injectors fitted, along with some mods to allow the Maxxecu to run 'Boost By Gear', and modify his Corsa power steering setup to be driven also by the Maxxecu.We used the pickup on his instrument cluster to provide the VSS signal straight to the ECU. We calibrated the speed output against the Dyno. We then used the Maxxecu functions to calibrate each gear ratio. In this case, we used a 4D table for all gears on the boost demand table. We used the same VSS input to replicate the original Corsa ECU, to send the PAS module the correct signals for both speed, and indeed RPM. Both sent via frequency outputs on our GPO outputs.A quick couple of hours on the Dyno to verify the fuelling, and add a little more boost. Cracking little car, thanks Mark for letting us help you along the way with it.Maxxecu / Maxxtuning AB Dyno Dynamics #mk1golf #golfgti #tuningshed #maxxecu #maxxecusport #tuner #golfmk1 #retro #vw #classiccar #classicvw #retrovw #mk1gti #pvengineering #20vt #20v
Kawasaki H2, supercharger I4, powered Sabre Race c Kawasaki H2, supercharger I4, powered Sabre Race car.Recently installed Kawasaki H2 engine replacing the fireblade engine.The car is a great piece of kit, dry sump, paddle shift, all the goodies. It sounds, as you'd expect, glorious.The car is used for track days only at the moment, and it sounds like the guys enjoy every minute at various tracks all around the country.Calibrated on Woolwich.#h2 #tuningshed #kawasaki #kawasakih2 #h2r #kawasakih2r #sabre #trackday #racecar #aero #slicks
Rob Bools M3 Powered Lofthouse Freelander.A spac Rob Bools M3 Powered Lofthouse Freelander.A space frame off roader, with an S54 mounted in the rear. A JEK Fabrications whole exhaust system, sequential box Motec and a whole load of other goodies. Booked in to eliminate some ongoing gremlins. Found a few potential dramas, and got the thing behaving as it should Fingers crossed it behaves itself over the weekend! Good luck Rob,JEK Fabrications MoTeC #m3 #bmwm3 #e46m3 #s54 #bmws54 #race #rally #tuningshed #sequential #pve #somersettuned
Parcelforce did alright out of me today! Libby spe Parcelforce did alright out of me today! Libby spent a couple of hours packaging this morning!MaxxECU Pro going off to a Military Application MaxxECU Race going out to a S2 QuattroMaxxECU Mini off to be an 8HP controller for an American wagon.MaxxECU Sport package for JaaaaagLink Evo plugin going off to, well, and EVO!Blink Marine 6-way keypad to go with the Maxxecu Mini.Plenty in stock, if we don't happen to have it we can get it pretty quickly!Lots of hard to get connectors on our webshop too!We don't just install and tune it, we can supply everything you need, along with advice and TeamViewer support to our customers!Maxxecu / Maxxtuning AB Blink Marine Link ECU #maxxecu #tuner #tuned #stockist #link #linkecu #pve #tuningshed
Sneak preview of the underneath of Spikes MK1 fies Sneak preview of the underneath of Spikes MK1 fiesta!It's been on a spit for the best part of a year, but should be back on her wheels within the next few weeks.It's fairly bonkers naturally, and again, to us, it's about the attention to detail. The stuff you can't see.Gen 1 haldex mounted in its own cradle with fully adjustable arms, you can just about see the rear mounted radiator in the picture. All frames recently come back from cerakote, and all arms powder coated by Mr Fox!This little thing will be epic!#mk1fiesta #xr2 #build #classiccar #spaceframe #awd #fiestaquattro #ecoboost #mk1xr2 #classicford #retroford #cerakoteeverything #tuningshed #fiesta
Pete's 'proper' Audi S2. He's owned since 2012. A Pete's 'proper' Audi S2. He's owned since 2012. A forged ABY, and a Garrett G30-770 along with a Maxxecu. 👌 @maxxecu @dynodynamicsau #quattro #audis2 #maxxecu #audiquattro #dynodfamily #tuner #tuningshed #g30 #g30770
Follow on Instagram

Tags

audi auto auto electrics bmw chard dealer devon diagnostics dyno dyno cell dyno dynamics egr electrical electrician electrics evolution chips ford honiton ilminster jaguar jaguar challenge map mapped mapping master dealer maxxecu pve remap remapped rolling road somerset somersettuned south west speed limiter t5 taunton tdi transit tuned tuner tuning tuningshed vw xkr yeovil

Cart

steve@pvengineering.co.uk

Please feel free to E-Mail any questions or requests.

Button Text

logo dark

Your number one choice in the South West for tuning & motorsport electronics

Main Contact Number

01460 234142

Our address

Units 1-3, Bramble Cottage, Newtown,
Buckland St Mary, Somerset, UK

tuningshed
S54 Powered E36 Kens E36, purchased as a 328i, th S54 Powered E36 Kens E36, purchased as a 328i, then upgraded to a very high specification. S54 conversion, LSD, Carbon Air ox lots of details and upgrades everywhere! Booked in for us for a couple bits of wiring and to Boot the CSL flash onto the original MS54HP. EWS delete along with a few relevant changes due to a manual transmission change. Cam offset modification for OEM cams. A quick run up on the Dyno for confirmation. Lots of induction noise, so naturally I popped the camera up for the noises! Barrrp #e36 #e36m3 #s54 #csl #m3csl #e46m3 #e46 #bmw #bmwm3 #tuningshed #pve
1968 Camero with a Supercharged LS3 on Maxxecu Rac 1968 Camero with a Supercharged LS3 on Maxxecu Race, Dave's a well known local car builder. Specialising in the American market. Historically, Dave can be found at Santa pod pulling quarter mile runs in this 1300bhp Camero. It's recently been undergoing a conversion to make it into more of a 'Street Car'. This has involved some serious modification. Some serious upgrades. It's got modern power steering, a modern Z06 corvette independent rear axle. Air conditioning, a modern power steering system. 🤩 The engine is a nice new LS3, with the Magnuson Superchargers bolt on package. Running the Maxxecu / Maxxtuning AB Race ECU and LS harness package, Dave got the car up and running himself, and we managed to finish the job off on the Dyno. Good healthy numbers, and a fantastic torque curve you could put a ruler on! #tuningshed #camero #1968 #ss #maxxecu #maxxecurace #pve #tuner #dyno #ls3 #magnusonsupercharger
YB Cosworth ECU & Loom package off out the door th YB Cosworth ECU & Loom package off out the door this morning! We've boarded out our 'fast moving looms', Cosworth YB, AJ16, AJV8, K20A2 etc. All can be customised to an extent. This loom is going out for use with the stock distributer & coil. But many customers opt for the Coil On Plug option. This customer has opted for printed labels. The loom is braided with Vidaflex® Monofil PE, this offers very good mechanical strength and also provide excellent resistance to salt water, oil, fuels and solvents. It is self-extinguishing and operates at temperatures within the range of – 70°C to +150°C. The junctions are adhesive heat shrunk and all applicable connectors are booted. Aux connectors on engine, aux connectors near ECU. Aux connectors in Deutch DT & DTM. Full support with all packages & ECUs sold. We provide Teamviewer time and phone support to get your engine up and running. :-) MaxxECU Street at the heart of this package. It's hard to think of a better specced ECU for the money than the MaxxECU Street frankly. Contact for any information: Libby@pvengineering.co.uk 01460 234142 www.p-v-e.co.uk @maxxecu #cosworth #yb #loom #maxxecu #tuner #calibration #support #tuningshed #pve
Maxxecu in full control. As always. Marks X-Type Maxxecu in full control. As always. Marks X-Type new race car build. The first one on his grid to run the AJ30, so he wanted to make a decent job of it. Naturally the Maxxecu Race along with the AIM MTX Strada would fit the bill. The Maxxecu is now configured to run the fly-by-wire, both inlet flaps, both VVT banks, sequential fuel injection and ignition. Knock control on both banks. Closed loop wideband with lean protection on both banks. Fuel pressure monitoring, and included in the fuel model. Oil pressure monitoring with shut down protection. On board logging up to 1000hz. Breath... One little box does the lot! Good luck to Mark & the Auto Reserve massive. Maxxecu / Maxxtuning AB Aim Technologies Auto Reserve Parts #maxxecu #tuningshed #jaguar #aj30 #tuner #tuned #maxxecurace #autoreserve #xtype
Steve's Time Attack Turbo R53. Dave from 611 Moto Steve's Time Attack Turbo R53. Dave from 611 Motorsport made his familiar journey down from Manchester last week with Steve's little Mini. Dave has been building the car from a shell that Steve has supplied, and moved lots of bits and pieces over from his old build. Lots of new 611 Motorsport suspension bits and pieces along with some nice upgrades. Look forward to seeing Steve out at Caldwell Park for the first round of Time Attack. @611motorsport @link_ecu @timeattack_uk @dynodynamicsau #r53 #mini #turbominis #link #linkecu #r53oc #timeattack #611racing
730bhp Supercharged Mustang for calibration on HP 730bhp Supercharged Mustang for calibration on HP tuners. Kevin's epic Supercharged Mustang, following an engine rebuild, he decidded to get the calibration checked out. We initially did some logging, and ran it on the Dyno to find lots of knock, and some lean conditions. We made the decision to modify the calibration accordingly, based on the logs. The ECU was encrypted. Naturally. Fortunately, I have some real good friends in the industry. Massive shout out to Kenny from Motorsport Developments LTD for using my Bench read to decrypt the lock, allowing me to tune it normally via HPTuners. At this point my HP Tuners software decided it needed to update it's VCM firmware, and bricked itself beyond repair, naturally. So my my next shout out goes to Dave at MET & Metclean Automotive Equipment who lent me his HPTuners VCM for the day. I sent the wife up to collect it. What a day. 😂😂 Ultimately ended up with a happy customer and 730 safer BHP's. But behold, the glorious noise of the supercharged 5.0 V8. 🔥🥳 #mustang #supercharger #supercharged #tuningshed #tuner #dyno #hptuners #ford #pcm #v8 #supercharged #superchargedmustanh
Stroker Carbon Skyline. Big Garrett turbo supplyi Stroker Carbon Skyline. Big Garrett turbo supplying the air for a Stroked fully forged RB. Running too much boost for the fuse box lid, which is also carbon! 🤤 I thought I'd pop a video up of it, it's only running low boost at the moment, and making some decent numbers. It'll be back soon running Moon Boost, and I'll do a more in depth post and video. Cracking piece of kit, obviously running a Maxxecu! Maxxecu Race on this beasty. Maxxecu / Maxxtuning AB Grants Of Wellington #skyline #nissanskyline #tuningshed #maxxecu #maxxecurace #rb25det #rb25neo #boost #garrett #boosted
Wild Maxxecu Pinto powered Austin A40! 800kg of ep Wild Maxxecu Pinto powered Austin A40! 800kg of epic fun. Attention to detail is 11/10! Maxxecu / Maxxtuning AB Aim Technologies Simpson Race Exhausts #pinto #maxxecu #austin #austina40 #trackcar #tuningshed
Right in my wheelhouse. Supercharger, Maxxecu, spi Right in my wheelhouse. Supercharger, Maxxecu, spitting fire. 🔥💯 Rick's Jaguar XJ. Sporting one of our AJ16 ECU & Loom packages, coupled with an AIM PDM08, and the Swallows M118 kit. We move the throttle bodies on the supercharged race cars wherever possible. It allows insane throttle response, and allows us to use tried and tested front mount intercoolers. It took some real time getting it all to work nicely though initially. Consistent power delivery is maintained through a whole race using this system though. We look forward to seeing rick out on this beast this year, race season is well upon us now! Swallows Jaguar - Swallows Racing MaxxECU Community Aim Technologies #jaguar #aj16 #supercharger #fbw #maxxecu #tuningshed #swallowsracing
Plamersport Jaguar JP1, undressed, and dirty! 😜 Plamersport Jaguar JP1, undressed, and dirty! 😜 Cosworth developed AJV6 shouting her way to the redline, with a little help from the Maxxecu, providing all the goodies along with shift cut for the hewland sequential! Maxxecu / Maxxtuning AB Swallows Jaguar - Swallows Racing #maxxecu #dyno #jaguar #jp1 #swallowsracing #ajv6 #cosworth
MK1 Fiesta Quattro back on her wheels! Ecoboost MK1 Fiesta Quattro back on her wheels! Ecoboost AWD & lots of carbon incoming! #fiestamk1 #mk1fiesta #fiestaquattro #maxxecu #dsg #haldex
Patrick's glorious little gem. I meant to do a re Patrick's glorious little gem. I meant to do a reel. But waffled on so it was too long. So it's a 'post'. Some more video of the wild Metro! #b18 #honda #metro #retrometro #precisionpaint #vtec #linkecu #retro #retrocars #aimtechnologies #tuningshed #blinkmarine #tuner #tuned
On this day, 20 years ago I first put PVE on the i On this day, 20 years ago I first put PVE on the internet! Back in the good old days, when everything was done in HTML. I went on an evening course with a pal to enable us to get some sort of online presence. Back in the days of Forums and such! The title page talking about zetec turbos, and RS Turbo's mainly! (I still have the car on the home page!) But yeah, courtesy of Wayback machine! PVE as an idea has been about for about 25 years. Wow. I'm old. Lots has happened in those years. Lots has changed. Mostly good though! Still here, live and kicking! The website looks quite a bit different now! www.pvengineering.co.uk ( Still manage it myself all these years later). The joys of being a small business owner right!? #tuningshed #pvengineering #rsbible #rsturbo
Rover Metro widebody with a turbocharged B18. Thi Rover Metro widebody with a turbocharged B18. This is a sneaky preview of Patrick from @precisionpaintwellington long term build. I'll do a better 'Reel' with a description soon, showing some of the details on this. It's pretty much 'next level'. Lots of really nice touches on this, using a car that's rarely modified frankly. Keeping it sensible at a bar of boost for now. When I say sensible, that's still 320whp on the built motor! Calibrated on a @link_ecu g4x. Spooled to a bar by 3800rpm, and making power all the way to 8500. #honda #vtec #precisionpaint #tuningshed #b18 #metro #retro #retrocars #widebody #painter
Marks Westfield powered by a late Fireblade Engine Marks Westfield powered by a late Fireblade Engine running MaxxECU Race, all the way from sunny Blackpool. Nice little story to this little car. A dream envisioned by Simon, and ultimately completed by Mark. A few years ago Simon got in contact, as he had a lovely little Westy that he wanted to fit a late Fireblade engine into. He wanted to run the Fly-By-Wire system as fitted by Honda. He sent the throttle bodies down for me to have a play with. Once we were confident we could run it, he booked it in. We ended up building a whole vehicle loom. Running the absolutely epic MaxxECU Race, coupled with a PDM20 and at the time and AIM MXS. We got the car up and running and got some tuning done on it, with a view to finish up a few bits and pieces in the future. Wheel speeds, quick shift etc etc. Simon then got the horn for some Wheel-to-wheel action, that I've been following. He's been doing really well, and now moving up into the BMW series. Ultimately, the car got sold to Mark. Mark has 'made it his own'. There is lots of carbon fibre, a colour change, and come more class upgrades. Including an air quick shifter now mounted into the 'passengers seat'! He's also upgraded to the genuinely amazing AIM steering wheel with integrated screen. Mark came down from Blackpool, baring cake! I was all in at this point! We did a little tuning, and did some messing about with the secondary injector setup, and a bit of calibration i the VE & ignition tables to get her absolutely clean. We then set about the fun stuff, some throttle blip on downshifts, and some ignition cut on upshifts. Launch control activated by the blink marine 12-Way keypad, and a high idle on another button (This is a factory race engine with a tiny stator that doesn't charge until 3200rpm!) Cake & Coffee were consumed in one end, and BHP's came out the other! :-) Good luck at the weekend Mark, pleasure to meet you. And yes. I struggled getting out..... Maxxecu / Maxxtuning AB Aim Technologies Blink Marine Dyno Dynamics #pve #tuningshed #westy #westfield #r1 #cbr1000 #trackcar #tuner #dyno #dynodfamily #somersettuned #screamer #track
Volvo 240 sleeper! Mikes proper Volvo 240 turbo s Volvo 240 sleeper! Mikes proper Volvo 240 turbo sleeper. Lots of goodies bolted onto the forged engine. A cheeky TD04 doing the spoolies! One of the most comfortable seats I've sat in while mapping! 🤣 A full leather Chesterfield copy! No videos as we cut short due to a cooling issue. Looking forward to seeing this back to see what it can do! #tuningshed #pve #volvo #sleeper #maxxecu #volvo #volvoforlife #turbo #volvoxc #volvofamily #volvos #swedishmetal #volvomoment #volvonation #volvowagon #volvolife #classicvolvo #volvopower #redblock #classiccars #s #series #turbobricks #b #wagon #cars #volvobrick #swedishbricks #redblocksociety #swedespeed
YB powered MK2 escort on Maxxecu Sport. Every now YB powered MK2 escort on Maxxecu Sport. Every now and again, something comes through the door that makes you sot back, and just appreciate the level of work that's gone into a project. This, was indeed one of those times. Chris has owned this for many many years, and I can tell you he treats it like a old friend! A built Cosworth YB, twin Scroll Borg Warner, Maxxecu Sport ECU running fly-by-wire. Attention to detail everywhere, an epic, epic build. We made some mapping adjustments, and ended up with 375whp. We also wired his Corsa power steering module to the ECU. This allows the power steering to get lighter/heavier based on wheel speed and engine rpm. In a behaviour that mimics an OEM car. Naturally all programmed via the ECU. Great car, great power, great build. Thanks for bringing it down Chris. :-) Maxxecu / Maxxtuning AB BorgWarner Boosted #tuningshed #pve #fordescort #ford #mk #escort #fordescortmk #rs #fordescortrs #escortmk #classicford #fastford #fordperformance #cars #xr #classiccars #carsofinstagram #retroford #rally #cosworth #fordsofinstagram #fordrs #fordracing #rallycar #escortrs #forduk #car #classiccar #motorsport
Maxxecu / Maxxtuning AB 8HP control using my PMC M Maxxecu / Maxxtuning AB 8HP control using my PMC Motorsport shifter. Push and hold for forwards & backwards. Powered by @aimtechnologies PDM32. #maxxecu #tuningshed #pmcmotorsport #aimtechnologies #8hp #senderella
As it turns out.. My man @matt_urchfab does not As it turns out.. My man @matt_urchfab does not approve of my new auto darkening Amazon Special welding spectacles. Im surprised frankly, I was going to go for the Amazon Basics welding monacle, but pushed the boat out. No pleasing some people right!? 🤔 🤣 Urchfab Mini looking sweet, sounding sweet, not behaving. I remembered very quickly that I don't fit it racing Minis. 🤣 #urchfab #tuningshed #mini #classicmini #weldinggoggles
Had a great day chilling at Castle Combe Circuit o Had a great day chilling at Castle Combe Circuit on Friday with a few of the guys. Thanks to Slip&Grip Automotive for another great track day. It was nice to test a few bits and pieces I've modified on the car. Mostly steering and cooling. Now running a Mégane MK4 column, driven with custom CAN by the Maxxecu / Maxxtuning AB Pro. Thanks for the photos @mrprezzas you caught the fire perfectly! Some good banter to be had. Nice to see @matt_urchfab changing spark plugs like a Pro! His little Mini will be a weapon! We had to short shift to keep the noise down, but ultimately a successful day. Everything worked, and worked well. Yes, I know the fire is childish. But I'm childish. It's a race car. It's turned up to 11. Yes sir. @swallowsracing #slipandgrip #tuningshed #pve #somersettuned #urchfab #castlecombe #trackday #senderella #tracktoy #racecar #v8 #supercharged #supercharger #ctcrc #classicthunder #maxxecu #brutas #8hp
Follow on Instagram
Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

3 weeks ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
S54 Powered E36Kens E36, purchased as a 328i, then upgraded to a very high specification. S54 conversion, LSD, Carbon Air ox lots of details and upgrades everywhere!Booked in for us for a couple bits of wiring and to Boot the CSL flash onto the original MS54HP. EWS delete along with a few relevant changes due to a manual transmission change. Cam offset modification for OEM cams.A quick run up on the Dyno for confirmation. Lots of induction noise, so naturally I popped the camera up for the noises!Barrrp#e36 #e36m3 #s54 #CSL #M3CSL #e46m3 #e46 #BMW #bmwm3 #tuningshed #PVE ... See MoreSee Less

Video

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

3 weeks ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
Aston Martin Lagonda for MaxxECU Race & Harness,I hope everyone is enjoying their half term, and ensuring the kids are entertained at all times! 🙃We were honoured enough to be able to build an engine harness for this Aston Martin Lagonda. It runs the 5.3 V8 Engine with some downdraft Jenveys! Running now using the Maxxecu / Maxxtuning AB Race, twin wideband lambda, added in idle bypass valves and all the trimmings in replacement of the old setup that ran roughly, and would struggle to start!It's an absolutely classic 1970s design, that's so bloody ugly, it's beautiful! I absolutely love it! I love the off the wall projects that make you have to work for it. I'd hate to be doing the same car/engine over and over!Massive thanks to Richard at MTX Motors for getting us involved in this epic project.The craziest bit about this project? It's in Hong Kong.Richard drew up exactly what he wanted and sent me some drawings. I built him a harness and shipped it over. I sent over a base map, then using the MaxxECU on board logging facilities, we mapped it on the road, from the other side of the planet! The only constraint has been the time difference. Often I've been in bed late at night, tuning a car in Hong Kong!Some Lagonda facts for fun:Throughout the history of the marque, the hand-built Lagonda was amongst the most expensive luxury saloons in the worldThe Lagonda was the first production car to use a digital instrument panel. The development cost for the electronics alone on the Lagonda came to four times as much as the budget for the whole car.It was named by Bloomberg Businessweek as one of the 50 ugliest cars of the last 50 years#tuningshed #astonmartin #lagonda #astonmartinlagonda #1970 #maxxecu #maxxecurace #v8 #mtxmotors #hongkong #tuner #tuned #mapping #retro #restomod ... See MoreSee Less

Video

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

4 weeks ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
1968 Camero with a Supercharged LS3 on Maxxecu Race,Dave's a well known local car builder. Specialising in the American market. Historically, Dave can be found at Santa pod pulling quarter mile runs in this 1300bhp Camero.It's recently been undergoing a conversion to make it into more of a 'Street Car'. This has involved some serious modification. Some serious upgrades. It's got modern power steering, a modern Z06 corvette independent rear axle. Air conditioning, a modern power steering system. 🤩The engine is Magnuson Superchargershe Magnuson Superchargers bolt Maxxecu / Maxxtuning ABe Maxxecu / Maxxtuning AB Race ECU and LS harness package, Dave got the car up and running himself, and we managed to finish the job off on the Dyno.Good healthy numbers, and a fantastic torque curve yo#tuningshed #camero on!##ssi#maxxecuc#maxxecurace##PVEm#tuner #dynoe#ls3c#magnusonsuperchargerls3 #magnusonsupercharger ... See MoreSee Less

Photo

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

1 month ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
Some nice silverware coming from Cadwell Park today!Jack Robinson pulling off a perfect points for the second time this season. Fastest Lap, Class Win, and overall Win, and Tom Robinson hot on his tail with his own class wins, and places on the podium in both races, in a fairly standard XJS. I reckon you could put these boys in wheelie bins and they'd still podium! Glad to see their hard work is paying dividends. Jack managing to get his V8 XK8 into the 1.38. We've loomed & tuned both of these cars, obviously running Maxxecu / Maxxtuning AB Well done to Swallows Jaguar - Swallows Racing Some great positive news from one of our sponsored cars this year too! Charlie Ford managed to break his gearbox in Qualifying. After lots of work to his fiesta, including a forged Duratec we've recently tuned for him on Link ECU . He managed to find another gearbox albeit without an LSD, and fit it in the paddock! He was rewarded with two Podium places! 😁Well done guys, keep up the good work!#swallowsracing #maxxecu #fiesta #st150 #duratec #racecar #racecars #jaguar #x100 #ajv8 #linkecu #support #calibration #winningteam #pve #tuningshed #cadwell ... See MoreSee Less

Photo

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

1 month ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
YB Cosworth ECU & Loom package off out the door this morning!We've boarded out our 'fast moving looms', Cosworth YB, AJ16, AJV8, K20A2 etc. All can be customised to an extent. This loom is going out for use with the stock distributer & coil. But many customers opt for the Coil On Plug option. This customer has opted for printed labels.The loom is braided with Vidaflex® Monofil PE, this offers very good mechanical strength and also provide excellent resistance to salt water, oil, fuels and solvents. It is self-extinguishing and operates at temperatures within the range of – 70°C to +150°C. The junctions are adhesive heat shrunk and all applicable connectors are booted. Aux connectors on engine, aux connectors near ECU. Aux connectors in Deutsch DT & DTM.Full support with all packages & ECUs sold. We provide Teamviewer time and phone support to get your engine up and running. :-)MaxxECU Street at the heart of this package. It's hard to think of a better specced ECU for the money than the MaxxECU Street frankly. Contact for any information:Libby@pvengineering.co.uk01460 234142www.p-v-e.co.uk@maxxecu #cosworth #yb #loom #maxxecu #tuner #calibration #support #tuningshed #pve ... See MoreSee Less

Photo

View on Facebook
· Share

Share on Facebook Share on Twitter Share on Linked In Share by Email

© 2025 Performance Vehicle Engineering, All Rights Reserved

CONTACT

Our Main Contact Details. You may Whattsapp, our main number if needed

Main Contact Number:

01460 234142

Our address

Units 1-3, Bramble Cottage, Newtown,
Buckland St Mary, Somerset, UK

Socials: