Skip to the content
www.pvengineering.co.uk – Performance Vehicle Engineeringlogo darklogo light
  • Home
  • Shop
  • Remapping
  • Live Mapping
  • Wiring Looms
  • Contact Us
Cart 0
No products in the cart.
www.pvengineering.co.uk – Performance Vehicle Engineering
  • Home
  • Shop
  • Remapping
  • Live Mapping
  • Wiring Looms
  • Contact Us
HomePosts tagged "mapping"
Peugeot 205 Gti on Emerald K6 for tuning
Live MappingWork Blog

Peugeot 205 Gti Live Mapping Session

This Peugeot 205 was booked in for a tuning session on Emerald K6. It had been wired and a base map installed elsewhere already. The car is fitted with an upgraded 405 2.0 Turbo en

Read More
Peugeot 205 gti rally car sadev box on dyno rolling road
Live MappingProjectsWork Blog

Peugeot 205 Rally Car Sadev, MaxxECU Conversion

We tuned this little 205 Rally car on Motec M4 a few years ago. The customer has since upgraded to a sequential Sadev gearbox. The Motec M4, although a good system for it’s d

Read More
Honda Civic Hondata S300 tuned on rolling road somerset
Live MappingWork Blog

Craigs B18 Civic on Hondata S300

We tuned Craig’s little Castle Combe hot hatch challenge car on Hondata. S300. We had to run through our standard run-in procedure on the vehicle first on the rolling road. W

Read More
Work Blog

Ultra4 Truck Tuned with HP Tuners on the rolling road

You’ve probably gathered, if you follow any of my pages, I’m a sucker for something interesting, or a little crazy. Then, of course, there’s this. 😂

Read More
Live MappingWork Blog

Peugeot 205 T16 on the rolling road

A quick video of a genuine Group B T16 205 we had on the rolling road at PVE in Somerset a while ago.   This vehicle was brought to us in order to go over a few issues the veh

Read More
Live MappingWork Blog

Jaguar XKR Kenne Bell supercharger 4.0 V8 tuned

Jaguar xkr v8 supercharger kenne bell Mapped On Emerald K6     Track prepared XKR 4.0 V8 Supercharged. Running a Kenne Bell upgraded supercharger, on a manual box.  

Read More
RemappingWork Blog

Peugeot 205 T16 In for mapping on Pectel

It’s not every day you get to meet your Hero’s. Let alone work on them. Peugeot T16 with a fresh build engine, in for tuning, mid-range power was down, we had to modify

Read More
Remapping

Subaru impreza WRX tuned open source on our rolling road, dyno cell

Subaru impreza WRX tuned on our rolling road. We used an open source system on this vehicle, to achieve a decent and correct tune, and added in Anti-Lag, and Launch control. Give u

Read More
S2000 powered race car, on OMEX on our rolling road, somerset, chard, PVE, VTEC
RemappingWork Blog

S2000 engined Autograss car live mapped on OMEX on the rolling road

We have a wealth of experience live mapping, we are very familiar with the OMEX system. This Autograss car was live mapped on our rolling road at PVE in Somerset. We are based in t

Read More

Cart

Categories

  • Jaguar Specific Tuning
  • Live Mapping
  • MaxxECU Instructional Videos
  • MaxxECU Projects
  • Projects
  • Remapping
  • Work Blog

Related Posts

xtremeracecars hartley v8 class 7 dyno maxxecu russ
Work Blog
Xtremeracecars hartley v8 maxxecu class 7 autograss car
AJV8 Cam timing adjustments dyno maxxecu tuningshed
Work Blog
Jacks highly tuned NA AJV8 Engine on MaxxECU
Darren Mullens Class 8 Autograss car wiring harness MaxxECU
Work Blog
Darren Mullens Class 8 Autograss car wiring loom

Instagram

tuningshed

X300 XJR Turbo! Listen to the spool! Loads more X300 XJR Turbo!Listen to the spool!Loads more information on the YouTube! Search for #tuningshed #maxxecu #jaguar #xjr #x300
Digital speedo conversion, keeping the retro look Digital speedo conversion, keeping the retro look & feel of the Peugeot Gti!I use James' K20 converted Pug 309 Gti as a base to convert his mechanical style speedometer to a newer digital style, keeping the classic looks and feels of the OEM cluster.Naturally these are fully programmable, and can be used in the 309 and indeed the 205gti.I take it one step further, and have new guage faces made to replicate the originals, only 'all the way up to 11', well, not really, 10, but still! I'm really happy with this conversion, I hope James will be too!I apologise for not having uploaded anything of late to my socials, I'm spinning plates constantly at the moment. Lots of exciting things going on at the moment, lots of development for some very well respected companies that will be revealed probably next year now. Some SERIOUS hours put in, but with some seriously cool cars!Thanks to Uncle Spike here for sorting the bracketry and physically getting the speedometer to fit into the OEM cluster. Thanks to Stef for sorting me with some spare clusters for some Beta runs! Thanks also to James for using his car as a Guinea pig!#k20 #tuningshed #gti #retrocars #pve #309gti #205gti #hothatch #maxxxecu #restomod #conversion
Massive congratulations to Jordan and his team at Massive congratulations to Jordan and his team at Yellow Peril Racing.Going home with a well deserved result at the Isle of Man Hill Rally. 1st in class and 6th overall, extending their class lead in the British Cross Country Championship.Jordan is a lovely guy, that genuinely deserves results like these. We can see the work that goes into these machines, the absolute abuse they take requires constant maintenance and repairs. This absolute weapon runs the BMW M62, coupled to the more and more popular 8HP gearbox. Naturally, all married together with the Maxxecu!We look forward to following team 'Yellow Peril', and thank them for keeping us updated. Credit to 54° North Images for the pictures. #yellowperilracing #8hp #offroad #tuningshed #maxxecu
An early 900 turbo, 1979 to be exact. Such an awk An early 900 turbo, 1979 to be exact.Such an awkward looking car by today's standards. Quirks everywhere. The windscreen is so heavily wrapped, something again these days is just a thing of the past.Tommy of TR Autos brought this over for us to look a t a few bits on the Dyno. He's a fountain of knowledge on any Saabs ( I can confirm, I've told him he is a sick man!) letting me in on various quirks of the early versions! Jackshaft for the water pump for instance on the early 8v engines. The gearbox arrangement feels odd too if you e never come across it!An old K-Jet system sorting the fuel delivery, and ultimately causing Tommy's visit! Fantastic car, even if I do immediately try and turn these damn things on using the key that's not there! 🫢🤭#saab #900 #saab900 #saab900turbo #900turbo #trautos #tuningshed
Cool-as-fuck-ometer is all the way around to 11. Cool-as-fuck-ometer is all the way around to 11.Vauxhall Chevette 'HSR Homage' F20C powered.Not a common sight these days, a Chevette in general. They were certainly more commonplace back when I first started driving. Whenever I get a common 70's car on the Dyno, I'm always amazed at how small they are. I literally had a 24 plate Aston Martin DB11 on the Dyno yesterday, a modern 2 x seater GT car, but the size difference is phenomenal. The Chevette, even with it's HSR panelling, felt miniscule!Funny how we remember things differently! Or maybe I'm just old!This little car is well known in the community, from what I can tell it's been built to a fantastic standard, and as I'm lead to believe, is built to HSR specs. It's fitted with a stock F20C Honda S2000 engine, with a set of Jenveys, and a dry sump system.I'm always a fan of the small details in builds. When the small details are correct, it usually means the rest is, and I won't spend my day tracing wiring faults or reattaching hoses in some manner.79' is a great year!Andrew, the current custodian has some plans for some potential competition driving in the old girl. Along with coating some of the parts with Cerakote! Andrew owns and runs Amitec - leaders in preparation and application of coating systems, and the quality of the Cerakoted parts on this car are testament. 😉Great to see you today Andrew, can't wait to catch up soon - he's promised me a couple of laps at Combe in the car.. and now it's in writing! 🤣Anyway, howling away, as it should be#jenvey #amitec #tuningshed #vauxhall #chevette #hsr #hs
Another Maxxecu Race Gen 2 harness built up for To Another Maxxecu Race Gen 2 harness built up for Tom & Jack at @swallowsracingThis is a concentric harness, with Autosport bulkhead connectors.Destined for something really fun!It amazes me how many hours these sorts of harnesses sup up. Moving from the CMC to the Superseal was definitely a good move from @maxxecu for the gen 2 units. #harness #jaguar #maxxecu #gen2 #swallowsracing tuningshed pve
The Jaguar AJ33 and the VVT! The VVT control for The Jaguar AJ33 and the VVT!The VVT control for the AJV8 comes up quite regularly for me. I've had a couple conversations on the phone this week from potential clients, both interested in fitting the AJV8 into a landrover based beasty of some description.Both guys telling me that the VVT on the AJ33 makes no difference to power, and it's just there for emissions. Often times it feels like I'm beating my head against a wall. I get arguments for 'keeping it simple', or 'it's easier to just not use it'.I meant VVT is pretty solid these days on aftermarket, it's literally a couple solenoids, and a pair of position sensors. Seems mad not to use it in my book.A couple of weeks back I took the opportunity while tuning one, to lock the cams (via the MaxxECU) at 0 degrees and do a run, then with optimised VVT and did a run. The runs were back to back, within a couple minutes of each other. Power & Torque displayed at the wheels. It's hard to argue with the 'No more power Gag', but I know I'd prefer the bags of extra torque left on the table right! It's not just for a few hundred revs either!PS. The Supercharged AJ33S behaves in the same manner!Naturally this is just WOT, and naturally in a race environment. There is no argument from me that VVT has an impact on the emissions, ultimately it should be calibrated correctly throughout, but to purposely not worry about emission, and indeed stump yourself of 40ftlb for the majority of your WOT seems utterly mad to me.Let those cams swing! Let those free ponies loose!@swallowsracing#aj33 #aj34 #tuningshed #pve #pvengineering vvt landrover maxxecu
Pete's Audi S2, Proper build, G30-770 Garrett lot Pete's Audi S2,Proper build, G30-770 Garrett lots of engine goodies.Glorious noises as you can imagine!Naturally Maxxecu, lots of really Naughty Launch control noises, and a whole lot of 5 cylinder big turbo noises making my day!We ran out of fuel pressure sadly! Pete will be back with more upgraded parts, so we can let her have the full extra two and a half atmospheres.Good to see you mate!@maxxecu @garrettmotion #tuningshed #quattro #audis2 #aby #maxxecu
Many moons ago, and I mean MANY! It was the early Many moons ago, and I mean MANY! It was the early 90's. Lots of interesting stuff going on the general Automotive world still. Most of all, (for me anyway) the Jaguar XJ220. A car that still looks absolutely f****g amazing now, was built and sold. There were posters on my wall of this thing, and we used to play 'Jaguar XJ220' on the Commodore Amiga. Life was epic.Fast forward a day or two, and I started racing a Jaguar. Before she got banned, we raced on a grid of classic Jaguars. Many of these had classic liveries. 'Castrol', 'Becks' and the likes! I have as you may know if you follow the page, an X100. So, for me, there was only one option. My favourite car of all time once raced in a Martini Livery. Hold my Beer!And so Senderella ended up with very rarely known XJ220 Martini Livery, as a Homage. (I can't stand the drink!) 🤣Fast forward a few more evenings... @swallowsracing and @jec_coffeeandcars @triplecoroast put on a coffee morning, in which the absolute legends at @jaguardaimlerheritage.trust drove an XJ220 to take part. Yes, they drove it from Gaydon to Somerset. It's a testament really to the things! Id have loved that job!Regardless, I didn't move very far from this car (and the coffee machine, naturally) all morning. I was lucky enough to move my car next to this legend and get a photo or two. Made my absolute year to be fair! I'm a happy boy!Thanks to all the guys that made this happen, the coffee and cars meets they've started doing are absolutely great, and I'm not a car show guy, like, at all! 🤣☕☕☕#xj220 #jaguar #senderella #swallowsracing #tuningshed
Cosworth YB Harness for Mk2 Escort, with MaxxECU R Cosworth YB Harness for Mk2 Escort, with MaxxECU RaceI seem to be getting more and more orders for these packages. I try to allow them to be as customised as is possible. Stevie, sent me down a 'pattern' of where he'd like his ECU located on his Mk2 escort, along with various other sensors and the like for his YB Converted Mk2. He's opted for fly by wire, modern injectors, K20 Coil on plug conversion along with various sensors for protection. Knock control / Oil temp / pressure and so on.I've left an Aux plug in the engine bay for future upgrades, along with plenty of I/O inside the car too!Stevie asked if I could sort a fuse box for him too, in order to make the installation as easy as it can be. I've modified the MaxxECU off the shelf fuse / relay box, so that all the new systems are powered by new fresh harnessing. Fuel pump & fans are powered by this fuse box. Plenty of labelled cable to get around the vehicle!I've also added in a few extra wired for his guages & cluster. Hopefully it'll make his life installing the system nice and easy!Another YB Mk2 safely under the instruction of a MaxxECU!Thanks for the custom Stevie, I look forward to getting logged onto this and getting you up and running. :-)@Maxxecu / Maxxtuning AB #tuningshed #yb #cosworth #harness #mk2escort #retroford #wiring #maxxecu #maxxecurace #pve #tuner #retro #classiccars
Dave's 1.8T MR2, no beetle, no MR2, no beetle! Wh Dave's 1.8T MR2, no beetle, no MR2, no beetle!What a concoction. This is a MK3 MR2, with a 1960's beetle popped on the top, with a 1.8T BAM conversion. Phew. Oh, Maxxecu Powered obviously.I love it when people build something, that they want. Exactly what they want. Not because the internet says they should, not because they want to gain subs on YouTube. Purely, because that's what they want. Enter stage left, Dave Mahoney. Dave wanted to build a Beetle he could 'Daily', so reliability, a modern engine, power steering, brakes etc. Dave says, he was 'In the bath' when he discovered the wheelbase for an MR2 was nearly the same as a beetle!And so it began,He bought an MR2, bought a beetle, and amalgamated the two! Its a pretty convincing beetle too honestly! It's even got two fake 1" exhausts hanging out the back!The perfect crime?Nope, The 1.8T conversion is becoming commonplace in the MK3 MR2, driven by Stav's channel. He's made a bolt in conversion mount kit for the 1.8T. Dave pops off and buys an Audi TT, pulls the engine and box, sells the remainder. Whipped the motor into the Beetle., and here we have it. He's recently installed a Maxxecu. The Maxxecu Race runs the 1.8T beautifully, and allows being able to run the OEM beetle guages straight from the ECU.It's very important how it looks to Dave., so there are lots of little bits and pieces to try and hide the fact it's actually an MR2. I absolutely love it. It sounds utterly ridiculous flying up the road too! 🤣🤣#maxxecu #beetle #mr2 #mr2beetle #18tconversion #retro #classiccars #vw #vw@maxxecu
Suns out, jags out. @jekexhausts @swallowsracing Suns out, jags out.@jekexhausts @swallowsracing@maxxecu #8hp #tuningshed #jaguar #x100 #maxxecu
MK4 Supra Maxxecu Plugin with 8HP support. This p MK4 Supra Maxxecu Plugin with 8HP support.This plugin Maxxecu adaptor off out the door this morning, has been modified to include wiring for an 8HP70 gearbox, and the BMW shifter.Some minor additions to be added in, a wideband lambda sensor, and an IAT sensor, and we're away!Again, a nice coat effective way of upgrading the old ECU, and running a modern transmission relatively easily. #8HP #tuningshed #pve #supra #plugin #maxxecu #2jz #maxxecurace
Take one Ariel 'Hartley' V8 Engine, and just pop i Take one Ariel 'Hartley' V8 Engine, and just pop it into something that weights even less....Russ from Xtreme Race Cars - naturally did just that.The unmistakable sound of a flat plane V8, revving to 10,500rpm. These engines were built by Hartley in the USA for Ariel. This Class 7 Autograss car should be pretty epic. The Class 7 will look like a Mini Pickup for all that are unfamiliar!Calibrated on the unbeatable MaxxECU Race ECU. Motec C127 Instrument cluster and a host of other goodies.Good luck to Russ for the Season.@maxxecu @dynodynamicsau #xtremeracecars #tuningshed #pve #somesettuned #v8 #flatplane #ariel #arielv8 #dynodynamics #maxxecu #maxxecurace #autograss #class7
Jacks AJV8 XK8. Jack Robinsons AJV8 powered XK ha Jacks AJV8 XK8.Jack Robinsons AJV8 powered XK has been under development for a few years now. Ultimately running a stock 4.2 Bottom end, with cams and headwork. We've wanted to get a 'proper' engine in this car for a good while. I mean, in reality he's currently running the 'Number 1' on his car, since winning his championship last year, but still, the plan was always to develop this NA engine into something worthwhile. I love these sorts of projects. Ultimately, very few people, if any who have done such a thing. Certainly few with cast iron information, or indeed results. Jack was successful enough in his XK to have been moved up a class, so this opened up being able to actually modify the engine to a similar fashion to others in his class (Albeit different engines). So here we have it, a 'revvy' AJV8. Lightened, balanced, fully customised engine. Built and developed between Swallows - PVE - Mark (Auto Engineering).We've spent an awful lot of time mechanically moving cam angles after running in this engine today. As you can imagine, modifying 4 x cam positions is a bit of a pain on a hot engine. (Luckily I had Tom Robinson for that)! Some very interesting results on moving the camshafts about were had on the custom camshafts. Ultimately being able to make some fairly significant gains in areas he thought the car was lacking in.As with all development, I'm keen to see how it progresses, we're revving this far more than it should be. Piston speed is a massive concern honestly, Mark has been very keen to keep mentioning! These mechanical limits are there to be pushed though, until somebody finds out right?!I wish Tom and Jack good luck racing in the Modern Classics with the Classic Sports Car Club at Spa next weekend. They will be facing serious cars there, plenty of BMW's and M3's. I'm very Jealous! Maybe next year.Good luck to Jack Robinson Tom Robinson and the whole Swallows Jaguar - Swallows Racing crew with this old girl! May your pistons stay in your liners!#maxxecu #jaguar #ajv8 #xk8 #tuningshed
Another K20 swap wiring harness nearing completion Another K20 swap wiring harness nearing completion.A classic hot hatch. Wonder if you can guess what?I've got an anal level of integration going on with this one. Anyone can get a K20 to run in anything. Nothing to it. Getting everything working as it should like factory takes some thinking about. Mechanical speedo, rev counter without enough revs!Going the extra mile.#maxxecu #kswap #harness #loom #maxxecurace #tuningshed #integration #hothatch
Maxxecu Race LS harness, one of two harnesses leav Maxxecu Race LS harness, one of two harnesses leaving today. We've supplied and modified this Maxxecu LS harness to incorporate the 8HP gearbox connector, and BMW shifter, along with adding in a connector for the clients pieburg CWA200 water pump. The client has opted for the Maxxecu Fuse Box also, so we've modified the fuse box and connector to incorporate the water pump & gearbox.This really should be a dead easy way of getting an LS with an 8HP up and running with very little hassle. This harness and ECU left today, ready to be slotted into, I believe a DAX kit car! @maxxecu #maxxecu #ls #lsswap #harness #tuningshed #loom #somersettuned
Porsche 944 Turbo, Maxxecu Race conversion, With Porsche 944 Turbo, Maxxecu Race conversion, With the added bonus, of a feature length Youtube video! https://youtu.be/hWp3O0-aaJg?si=XiJViM5qIizVzScNI've been really poor with updating my socials, I've taken lots of video, and photographs, and so absolutely nothing with it all! I'll work through it all one day.....Regardless, Steve's lovely 944 turbo track tool.We upgraded it to a Maxxecu RaceFly-By-WireModern injectorsModern knock controlAll guages working as they should Massive gains made.@maxxecu @dynodynamicsau #maxxecu #944 #944turbo #tuningshed #tuner
AJ16 - Maxxecu Race Gen2 with 8HP?! Right you lot AJ16 - Maxxecu Race Gen2 with 8HP?!Right you lot, come on a connector fondling journey with me! 👀🫣🤣One of the more in depth AJ16 harnesses we've built, the first one I've done using the Gen2 Race. Pretty much all of the V8 systems that go out the door are built on the Gen2, but generally we stick to the Race Gen1 for the AJ16.This harness is provided ready to go into an XJS. It uses the OEM crank and Cam sensors including the pickups. I'm told there are still systems being sold where you have to hack this stuff about. This runs the OEM systems, and fully sequentially.It has dual knock sensors for on board knock control.Dual LSU5.2 wideband lambda controlFly-By-Wire ready to goFuel temperature and pressure monitoring.Oil pressure and temperature monitoring.4L80E direct control ready8HP control ready.All the epic benefits of the Gen2 Race, including crazy internal logging storage, WiFi/Bluetooth loads of extra IO.This loom and ECU will be able to develop with the car as things are upgraded and installed.We started fitting the Maxxecu to Jaguars about 7-8 years ago. We install now nothing but the Maxxecu. Plenty of others are seeing the light and moving over now though. 👌 I like to lead, so others can follow! 😁🤔🫢Working with the best:@swallowsracing Swallows Jaguar - Swallows Racing @maxxecu #maxxecu #tuningshed #swallowsracing #swallows #aj16 #8hp #jaguar #xjs #gen2 #harness #loom
David's 4.2 8HP AJV8 Trialer. David's using our A David's 4.2 8HP AJV8 Trialer.David's using our AJV8 package on his vehicle, the Maxxecu Race H20, along with a PDM20 to supply the power.Quite often when cars turn up for the Dyno, there are things that go wrong. Things are missed. Jubilee clips fluid leaks and so on. Naturally often it's the first time these sorts of vehicles have been run up properly. So I do my best to work with it, and get the car thought he Dyno session.This thing. Polar opposite. Everything was spot on ready to go. Absolute testament to David and his Dad. I mean, he does own a Jaguar Landrover specialist up near Milton Keynes, but still, I've seen all sorts over the years!Mighty impressed was I! We worked through tuning the engine, and calibrating the 8HP through the Maxxecu to work how he wanted it for his chosen Motorsport. I think you'll agree, it looks and sounds awesome!Thanks for making the trip guys, genuine pleasure to be able to work with you on this beasty!Maxxecu / Maxxtuning AB #ajv8 #jaguar #landrover #8hp #maxxecu #jlr #v8 #tuningshed
Follow on Instagram

Tags

audi auto auto electrics bmw chard dealer devon diagnostics dyno dyno cell dyno dynamics egr electrical electrician electrics evolution chips ford honiton ilminster jaguar map mapped mapping master dealer maxxecu pve remap remapped rolling road rollingroad somerset somersettuned south west speed limiter t5 taunton tdi transit tuned tuner tuning tuningshed vw xkr yeovil

Cart

steve@pvengineering.co.uk

Please feel free to E-Mail any questions or requests.

Button Text

logo dark

Your number one choice in the South West for tuning & motorsport electronics

Main Contact Number

01460 234142

Our address

Units 1-3, Bramble Cottage, Newtown,
Buckland St Mary, Somerset, UK

tuningshed
X300 XJR Turbo! Listen to the spool! Loads more X300 XJR Turbo! Listen to the spool! Loads more information on the YouTube! Search for #tuningshed #maxxecu #jaguar #xjr #x300
Digital speedo conversion, keeping the retro look Digital speedo conversion, keeping the retro look & feel of the Peugeot Gti! I use James' K20 converted Pug 309 Gti as a base to convert his mechanical style speedometer to a newer digital style, keeping the classic looks and feels of the OEM cluster. Naturally these are fully programmable, and can be used in the 309 and indeed the 205gti. I take it one step further, and have new guage faces made to replicate the originals, only 'all the way up to 11', well, not really, 10, but still! I'm really happy with this conversion, I hope James will be too! I apologise for not having uploaded anything of late to my socials, I'm spinning plates constantly at the moment. Lots of exciting things going on at the moment, lots of development for some very well respected companies that will be revealed probably next year now. Some SERIOUS hours put in, but with some seriously cool cars! Thanks to Uncle Spike here for sorting the bracketry and physically getting the speedometer to fit into the OEM cluster. Thanks to Stef for sorting me with some spare clusters for some Beta runs! Thanks also to James for using his car as a Guinea pig! #k20 #tuningshed #gti #retrocars #pve #309gti #205gti #hothatch #maxxxecu #restomod #conversion
Massive congratulations to Jordan and his team at Massive congratulations to Jordan and his team at Yellow Peril Racing. Going home with a well deserved result at the Isle of Man Hill Rally. 1st in class and 6th overall, extending their class lead in the British Cross Country Championship. Jordan is a lovely guy, that genuinely deserves results like these. We can see the work that goes into these machines, the absolute abuse they take requires constant maintenance and repairs. This absolute weapon runs the BMW M62, coupled to the more and more popular 8HP gearbox. Naturally, all married together with the Maxxecu! We look forward to following team 'Yellow Peril', and thank them for keeping us updated. Credit to 54° North Images for the pictures. #yellowperilracing #8hp #offroad #tuningshed #maxxecu
An early 900 turbo, 1979 to be exact. Such an awk An early 900 turbo, 1979 to be exact. Such an awkward looking car by today's standards. Quirks everywhere. The windscreen is so heavily wrapped, something again these days is just a thing of the past. Tommy of TR Autos brought this over for us to look a t a few bits on the Dyno. He's a fountain of knowledge on any Saabs ( I can confirm, I've told him he is a sick man!) letting me in on various quirks of the early versions! Jackshaft for the water pump for instance on the early 8v engines. The gearbox arrangement feels odd too if you e never come across it! An old K-Jet system sorting the fuel delivery, and ultimately causing Tommy's visit! Fantastic car, even if I do immediately try and turn these damn things on using the key that's not there! 🫢🤭 #saab #900 #saab900 #saab900turbo #900turbo #trautos #tuningshed
Cool-as-fuck-ometer is all the way around to 11. Cool-as-fuck-ometer is all the way around to 11. Vauxhall Chevette 'HSR Homage' F20C powered. Not a common sight these days, a Chevette in general. They were certainly more commonplace back when I first started driving. Whenever I get a common 70's car on the Dyno, I'm always amazed at how small they are. I literally had a 24 plate Aston Martin DB11 on the Dyno yesterday, a modern 2 x seater GT car, but the size difference is phenomenal. The Chevette, even with it's HSR panelling, felt miniscule! Funny how we remember things differently! Or maybe I'm just old! This little car is well known in the community, from what I can tell it's been built to a fantastic standard, and as I'm lead to believe, is built to HSR specs. It's fitted with a stock F20C Honda S2000 engine, with a set of Jenveys, and a dry sump system. I'm always a fan of the small details in builds. When the small details are correct, it usually means the rest is, and I won't spend my day tracing wiring faults or reattaching hoses in some manner. 79' is a great year! Andrew, the current custodian has some plans for some potential competition driving in the old girl. Along with coating some of the parts with Cerakote! Andrew owns and runs Amitec - leaders in preparation and application of coating systems, and the quality of the Cerakoted parts on this car are testament. 😉 Great to see you today Andrew, can't wait to catch up soon - he's promised me a couple of laps at Combe in the car.. and now it's in writing! 🤣 Anyway, howling away, as it should be #jenvey #amitec #tuningshed #vauxhall #chevette #hsr #hs
Another Maxxecu Race Gen 2 harness built up for To Another Maxxecu Race Gen 2 harness built up for Tom & Jack at @swallowsracing This is a concentric harness, with Autosport bulkhead connectors. Destined for something really fun! It amazes me how many hours these sorts of harnesses sup up. Moving from the CMC to the Superseal was definitely a good move from @maxxecu for the gen 2 units. #harness #jaguar #maxxecu #gen2 #swallowsracing tuningshed pve
The Jaguar AJ33 and the VVT! The VVT control for The Jaguar AJ33 and the VVT! The VVT control for the AJV8 comes up quite regularly for me. I've had a couple conversations on the phone this week from potential clients, both interested in fitting the AJV8 into a landrover based beasty of some description. Both guys telling me that the VVT on the AJ33 makes no difference to power, and it's just there for emissions. Often times it feels like I'm beating my head against a wall. I get arguments for 'keeping it simple', or 'it's easier to just not use it'. I meant VVT is pretty solid these days on aftermarket, it's literally a couple solenoids, and a pair of position sensors. Seems mad not to use it in my book. A couple of weeks back I took the opportunity while tuning one, to lock the cams (via the MaxxECU) at 0 degrees and do a run, then with optimised VVT and did a run. The runs were back to back, within a couple minutes of each other. Power & Torque displayed at the wheels. It's hard to argue with the 'No more power Gag', but I know I'd prefer the bags of extra torque left on the table right! It's not just for a few hundred revs either! PS. The Supercharged AJ33S behaves in the same manner! Naturally this is just WOT, and naturally in a race environment. There is no argument from me that VVT has an impact on the emissions, ultimately it should be calibrated correctly throughout, but to purposely not worry about emission, and indeed stump yourself of 40ftlb for the majority of your WOT seems utterly mad to me. Let those cams swing! Let those free ponies loose! @swallowsracing #aj33 #aj34 #tuningshed #pve #pvengineering vvt landrover maxxecu
Pete's Audi S2, Proper build, G30-770 Garrett lot Pete's Audi S2, Proper build, G30-770 Garrett lots of engine goodies. Glorious noises as you can imagine! Naturally Maxxecu, lots of really Naughty Launch control noises, and a whole lot of 5 cylinder big turbo noises making my day! We ran out of fuel pressure sadly! Pete will be back with more upgraded parts, so we can let her have the full extra two and a half atmospheres. Good to see you mate! @maxxecu @garrettmotion #tuningshed #quattro #audis2 #aby #maxxecu
Many moons ago, and I mean MANY! It was the early Many moons ago, and I mean MANY! It was the early 90's. Lots of interesting stuff going on the general Automotive world still. Most of all, (for me anyway) the Jaguar XJ220. A car that still looks absolutely f****g amazing now, was built and sold. There were posters on my wall of this thing, and we used to play 'Jaguar XJ220' on the Commodore Amiga. Life was epic. Fast forward a day or two, and I started racing a Jaguar. Before she got banned, we raced on a grid of classic Jaguars. Many of these had classic liveries. 'Castrol', 'Becks' and the likes! I have as you may know if you follow the page, an X100. So, for me, there was only one option. My favourite car of all time once raced in a Martini Livery. Hold my Beer! And so Senderella ended up with very rarely known XJ220 Martini Livery, as a Homage. (I can't stand the drink!) 🤣 Fast forward a few more evenings... @swallowsracing and @jec_coffeeandcars @triplecoroast put on a coffee morning, in which the absolute legends at @jaguardaimlerheritage.trust drove an XJ220 to take part. Yes, they drove it from Gaydon to Somerset. It's a testament really to the things! Id have loved that job! Regardless, I didn't move very far from this car (and the coffee machine, naturally) all morning. I was lucky enough to move my car next to this legend and get a photo or two. Made my absolute year to be fair! I'm a happy boy! Thanks to all the guys that made this happen, the coffee and cars meets they've started doing are absolutely great, and I'm not a car show guy, like, at all! 🤣☕☕☕ #xj220 #jaguar #senderella #swallowsracing #tuningshed
Cosworth YB Harness for Mk2 Escort, with MaxxECU R Cosworth YB Harness for Mk2 Escort, with MaxxECU Race I seem to be getting more and more orders for these packages. I try to allow them to be as customised as is possible. Stevie, sent me down a 'pattern' of where he'd like his ECU located on his Mk2 escort, along with various other sensors and the like for his YB Converted Mk2. He's opted for fly by wire, modern injectors, K20 Coil on plug conversion along with various sensors for protection. Knock control / Oil temp / pressure and so on. I've left an Aux plug in the engine bay for future upgrades, along with plenty of I/O inside the car too! Stevie asked if I could sort a fuse box for him too, in order to make the installation as easy as it can be. I've modified the MaxxECU off the shelf fuse / relay box, so that all the new systems are powered by new fresh harnessing. Fuel pump & fans are powered by this fuse box. Plenty of labelled cable to get around the vehicle! I've also added in a few extra wired for his guages & cluster. Hopefully it'll make his life installing the system nice and easy! Another YB Mk2 safely under the instruction of a MaxxECU! Thanks for the custom Stevie, I look forward to getting logged onto this and getting you up and running. :-) @Maxxecu / Maxxtuning AB #tuningshed #yb #cosworth #harness #mk2escort #retroford #wiring #maxxecu #maxxecurace #pve #tuner #retro #classiccars
Dave's 1.8T MR2, no beetle, no MR2, no beetle! Wh Dave's 1.8T MR2, no beetle, no MR2, no beetle! What a concoction. This is a MK3 MR2, with a 1960's beetle popped on the top, with a 1.8T BAM conversion. Phew. Oh, Maxxecu Powered obviously. I love it when people build something, that they want. Exactly what they want. Not because the internet says they should, not because they want to gain subs on YouTube. Purely, because that's what they want. Enter stage left, Dave Mahoney. Dave wanted to build a Beetle he could 'Daily', so reliability, a modern engine, power steering, brakes etc. Dave says, he was 'In the bath' when he discovered the wheelbase for an MR2 was nearly the same as a beetle! And so it began, He bought an MR2, bought a beetle, and amalgamated the two! Its a pretty convincing beetle too honestly! It's even got two fake 1" exhausts hanging out the back! The perfect crime? Nope, The 1.8T conversion is becoming commonplace in the MK3 MR2, driven by Stav's channel. He's made a bolt in conversion mount kit for the 1.8T. Dave pops off and buys an Audi TT, pulls the engine and box, sells the remainder. Whipped the motor into the Beetle., and here we have it. He's recently installed a Maxxecu. The Maxxecu Race runs the 1.8T beautifully, and allows being able to run the OEM beetle guages straight from the ECU. It's very important how it looks to Dave., so there are lots of little bits and pieces to try and hide the fact it's actually an MR2. I absolutely love it. It sounds utterly ridiculous flying up the road too! 🤣🤣 #maxxecu #beetle #mr2 #mr2beetle #18tconversion #retro #classiccars #vw #vw @maxxecu
Suns out, jags out. @jekexhausts @swallowsracing Suns out, jags out. @jekexhausts @swallowsracing @maxxecu #8hp #tuningshed #jaguar #x100 #maxxecu
MK4 Supra Maxxecu Plugin with 8HP support. This p MK4 Supra Maxxecu Plugin with 8HP support. This plugin Maxxecu adaptor off out the door this morning, has been modified to include wiring for an 8HP70 gearbox, and the BMW shifter. Some minor additions to be added in, a wideband lambda sensor, and an IAT sensor, and we're away! Again, a nice coat effective way of upgrading the old ECU, and running a modern transmission relatively easily. #8HP #tuningshed #pve #supra #plugin #maxxecu #2jz #maxxecurace
Take one Ariel 'Hartley' V8 Engine, and just pop i Take one Ariel 'Hartley' V8 Engine, and just pop it into something that weights even less.... Russ from Xtreme Race Cars - naturally did just that. The unmistakable sound of a flat plane V8, revving to 10,500rpm. These engines were built by Hartley in the USA for Ariel. This Class 7 Autograss car should be pretty epic. The Class 7 will look like a Mini Pickup for all that are unfamiliar! Calibrated on the unbeatable MaxxECU Race ECU. Motec C127 Instrument cluster and a host of other goodies. Good luck to Russ for the Season. @maxxecu @dynodynamicsau #xtremeracecars #tuningshed #pve #somesettuned #v8 #flatplane #ariel #arielv8 #dynodynamics #maxxecu #maxxecurace #autograss #class7
Jacks AJV8 XK8. Jack Robinsons AJV8 powered XK ha Jacks AJV8 XK8. Jack Robinsons AJV8 powered XK has been under development for a few years now. Ultimately running a stock 4.2 Bottom end, with cams and headwork. We've wanted to get a 'proper' engine in this car for a good while. I mean, in reality he's currently running the 'Number 1' on his car, since winning his championship last year, but still, the plan was always to develop this NA engine into something worthwhile. I love these sorts of projects. Ultimately, very few people, if any who have done such a thing. Certainly few with cast iron information, or indeed results. Jack was successful enough in his XK to have been moved up a class, so this opened up being able to actually modify the engine to a similar fashion to others in his class (Albeit different engines). So here we have it, a 'revvy' AJV8. Lightened, balanced, fully customised engine. Built and developed between Swallows - PVE - Mark (Auto Engineering). We've spent an awful lot of time mechanically moving cam angles after running in this engine today. As you can imagine, modifying 4 x cam positions is a bit of a pain on a hot engine. (Luckily I had Tom Robinson for that)! Some very interesting results on moving the camshafts about were had on the custom camshafts. Ultimately being able to make some fairly significant gains in areas he thought the car was lacking in. As with all development, I'm keen to see how it progresses, we're revving this far more than it should be. Piston speed is a massive concern honestly, Mark has been very keen to keep mentioning! These mechanical limits are there to be pushed though, until somebody finds out right?! I wish Tom and Jack good luck racing in the Modern Classics with the Classic Sports Car Club at Spa next weekend. They will be facing serious cars there, plenty of BMW's and M3's. I'm very Jealous! Maybe next year. Good luck to Jack Robinson Tom Robinson and the whole Swallows Jaguar - Swallows Racing crew with this old girl! May your pistons stay in your liners! #maxxecu #jaguar #ajv8 #xk8 #tuningshed
Another K20 swap wiring harness nearing completion Another K20 swap wiring harness nearing completion. A classic hot hatch. Wonder if you can guess what? I've got an anal level of integration going on with this one. Anyone can get a K20 to run in anything. Nothing to it. Getting everything working as it should like factory takes some thinking about. Mechanical speedo, rev counter without enough revs! Going the extra mile. #maxxecu #kswap #harness #loom #maxxecurace #tuningshed #integration #hothatch
Maxxecu Race LS harness, one of two harnesses leav Maxxecu Race LS harness, one of two harnesses leaving today. We've supplied and modified this Maxxecu LS harness to incorporate the 8HP gearbox connector, and BMW shifter, along with adding in a connector for the clients pieburg CWA200 water pump. The client has opted for the Maxxecu Fuse Box also, so we've modified the fuse box and connector to incorporate the water pump & gearbox. This really should be a dead easy way of getting an LS with an 8HP up and running with very little hassle. This harness and ECU left today, ready to be slotted into, I believe a DAX kit car! @maxxecu #maxxecu #ls #lsswap #harness #tuningshed #loom #somersettuned
Porsche 944 Turbo, Maxxecu Race conversion, With Porsche 944 Turbo, Maxxecu Race conversion, With the added bonus, of a feature length Youtube video! https://youtu.be/hWp3O0-aaJg?si=XiJViM5qIizVzScN I've been really poor with updating my socials, I've taken lots of video, and photographs, and so absolutely nothing with it all! I'll work through it all one day..... Regardless, Steve's lovely 944 turbo track tool. We upgraded it to a Maxxecu Race Fly-By-Wire Modern injectors Modern knock control All guages working as they should Massive gains made. @maxxecu @dynodynamicsau #maxxecu #944 #944turbo #tuningshed #tuner
AJ16 - Maxxecu Race Gen2 with 8HP?! Right you lot AJ16 - Maxxecu Race Gen2 with 8HP?! Right you lot, come on a connector fondling journey with me! 👀🫣🤣 One of the more in depth AJ16 harnesses we've built, the first one I've done using the Gen2 Race. Pretty much all of the V8 systems that go out the door are built on the Gen2, but generally we stick to the Race Gen1 for the AJ16. This harness is provided ready to go into an XJS. It uses the OEM crank and Cam sensors including the pickups. I'm told there are still systems being sold where you have to hack this stuff about. This runs the OEM systems, and fully sequentially. It has dual knock sensors for on board knock control. Dual LSU5.2 wideband lambda control Fly-By-Wire ready to go Fuel temperature and pressure monitoring. Oil pressure and temperature monitoring. 4L80E direct control ready 8HP control ready. All the epic benefits of the Gen2 Race, including crazy internal logging storage, WiFi/Bluetooth loads of extra IO. This loom and ECU will be able to develop with the car as things are upgraded and installed. We started fitting the Maxxecu to Jaguars about 7-8 years ago. We install now nothing but the Maxxecu. Plenty of others are seeing the light and moving over now though. 👌 I like to lead, so others can follow! 😁🤔🫢 Working with the best: @swallowsracing Swallows Jaguar - Swallows Racing @maxxecu #maxxecu #tuningshed #swallowsracing #swallows #aj16 #8hp #jaguar #xjs #gen2 #harness #loom
David's 4.2 8HP AJV8 Trialer. David's using our A David's 4.2 8HP AJV8 Trialer. David's using our AJV8 package on his vehicle, the Maxxecu Race H20, along with a PDM20 to supply the power. Quite often when cars turn up for the Dyno, there are things that go wrong. Things are missed. Jubilee clips fluid leaks and so on. Naturally often it's the first time these sorts of vehicles have been run up properly. So I do my best to work with it, and get the car thought he Dyno session. This thing. Polar opposite. Everything was spot on ready to go. Absolute testament to David and his Dad. I mean, he does own a Jaguar Landrover specialist up near Milton Keynes, but still, I've seen all sorts over the years! Mighty impressed was I! We worked through tuning the engine, and calibrating the 8HP through the Maxxecu to work how he wanted it for his chosen Motorsport. I think you'll agree, it looks and sounds awesome! Thanks for making the trip guys, genuine pleasure to be able to work with you on this beasty! Maxxecu / Maxxtuning AB #ajv8 #jaguar #landrover #8hp #maxxecu #jlr #v8 #tuningshed
Follow on Instagram
Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno(opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

(opens in a new tab)
Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno is at Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno.

7 days ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
Turbocharged X300 XJR!A video going into detail on Alex's turbocharged XJR. I chat about the car and the conversion that has been completed.Quite a few questions answered on this interesting car, with thanks to:All of the mechanical hardware & farbication:LeadFoot Racing - LFRNew turbocharger supplied by:Pulsar Turbos UKEcu, naturally:Maxxecu / Maxxtuning AByoutu.be/FnvypVWKLPM?si=UJPA_fcBp_0rHUdt#tuningshed #pve #lfr #maxxecu #jaguar #x300 #aj16s #turbocharged #swallowsracing #xjr #Dyno #DynoTesting #CarTuning #ModifiedCars #PerformanceCars #BritishCars #pulsarturbo #dynodfamily ...

www.youtube.com

youtu.be

Video

View on Facebook (opens in a new tab)
· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno

1 week ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
I realised I've not thanked the usual suspects for the help with my 'rear end', a few weeks ago!A good while ago, I designed an alloy rear frame and tank holder for my old Jag!I cut the boot floor and surrounding areas out made a cardboard cutout of my design, and set about it!It lowers the CG of the car significantly. Removed about 26kg from the vehicle, and allowed me to carry more fuel if I wish. It also has mounts for the BGW now straight to the chassis, which has been another job on the list.Also some significant changes to brakes and lubrication system, We've even got decent paddle shifters on the old girl now, but that's a post for another day! 🤣Thanks to Howard at Aller Engineering SW Ltd for laser cutting my drawings, and turning a little idea onto reality for me yet again.Thanks to Simon Dowell & Mike Wells-Burr for a couple of Sundays they lost cutting my car around... Again. 🤣Thanks to Adam Hunt from Noath Precision for again, turning my drawings into a reality with my oil bypass AJV8 block!Thanks for James King at JEK Fabrications for sticking all my stuff together, and bringing the whole deal as one!Thanks to Tom Robinson & Jack Robinson from Swallows Jaguar - Swallows Racing for corner weighting and sorting the Geo on her after all this cutting about!Get to test it at Castle Combe Circuit with the Jaguar Enthusiasts' Club for one of their epic track days next week. Watch it piss down, as I've got slicks on it still! 🤣🤣Anyway, Libby has told me I can have carbon doors and tailgate now! So that's a few Sundays over the winter sorted! 🤣🤣#pvengineering #swallowsracing #tuningshed #x100 #ajv8 #racecar #carbon #jaguar ...

Photo

View on Facebook (opens in a new tab)
· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno is at Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno.

1 week ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
I always forget how many hours goes into a high grade harness.Look at me, I made a reel!!Harness 1 of 3 for a very high spec E-Type for Wren Classics. Maxxecu Naturally.Maxxecu / Maxxtuning AB Wren Classics#motorsports #harness #wiring #loom #tuningshed #pve ...

Video

View on Facebook (opens in a new tab)
· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno is at Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno.

2 weeks ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
X300 Jaguar XJR -- Turbo.Had to post a video, the sound of this thing it epic! Will post more details as long as the owner is happy enough for me to do so tomorrow.🧐🧐😍#tuningshed #jaguar #XJR #AJ16 #turbo ...

Video

View on Facebook (opens in a new tab)
· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno is with Swallows Jaguar - Swallows Racing.

2 weeks ago

Performance Vehicle Engineering - PVE - Mapping, Remapping & Dyno
Really happy to be able to announce that we are stocking the new DomiWorks Engineering AJ6/AJ16 8HP adapter plate.These allow our AJ6 based engines to run the unbeatable 8HP gearbox. There is simply no automatic that touches it.For the last 12 months we've been running the 8HP on an AJ16 on a different adapter plate we'd been developing. Upon hearing that Domiworks were making one (as I mentioned in one of my videos), we decided to just wait for the Domiworks one to be released. As we've seen and used many of their kits now, we know it'll be absolutely bang on. We've recently used a couple of the Jaguar V12 kits for 8HP conversions, and know there is nothing near the quality.Naturally, because we've had our little X300 test mule, we've known the relevant harness mods and have offered this into our AJ16 harnesses for the last 12 months! There are at least 15 harnesses out there 8HP ready!We already stock the oil converter to go from the Jag box, to AN10 oil pipes.The MaxxECU AJ16 kits we build control the 8HP70 straight out of the box! Buttery smooth gear changes, actual torque reduction, actual throttle blip on our FBW packages. Just like the OEM.The 8HP70 gearbox is a glorious piece of kit, and is the talking point of many modified cars at the moment. The MaxxECU control allows various different gearbox modes, shifting points, torque control, live modification from within the ECU software. After using the test mule X300, I can tell you that the 8HP suits the AJ16 perfectly. We've got a number of V12s now running the MaxxECU 8HP system, I’m sure the AJ6 based kits will be even more popular!We were the first to develop a specific AJ16 harness/ECU system years ago with Swallows Jaguar - Swallows Racing. We wanted a system that was a direct plug-in system - one we sell to a client, post to them, and get it running from often the other side of the planet. Our aim has never been to provide a cheap system, but more a complete solution. Offering better than OEM smooth engine control using all the OEM sensors. On board datalogging, and class leading onboard wideband control allows us to tune the ECU remotely, with ease. More recently our systems go out with modern LSU5.2 lambda. 90% of our clients this year have opted for fly-by-wire. Giving modern reliability, and again, complete control!#8hp #swallowsracing #jaguar #aj16 #aj6 #8speed #tuningshed #xjs #x300 #straightsix #maxxecu #harness ...

Photo

View on Facebook (opens in a new tab)
· Share

Share on Facebook (opens in a new tab) Share on Twitter (opens in a new tab) Share on LinkedIn (opens in a new tab) Share by Email (opens in a new tab)

© 2025 Performance Vehicle Engineering, All Rights Reserved

CONTACT

Our Main Contact Details. You may Whattsapp, our main number if needed

Main Contact Number:

01460 234142

Our address

Units 1-3, Bramble Cottage, Newtown,
Buckland St Mary, Somerset, UK

Socials: